scheides
05-31-2008, 01:42 AM
Got this ride for Anna about a year ago, and it might have been this that spurred Kracka into ditching the torqueless S2k and move towards the dark side. At the time, I threatened him with the fact that my wife's car was going to be as fast as his. :D
Well, as life goes, a year has gone by and no mods to it yet, so it is high time to get some stuff done! For those that don't know, this is a direct injection 2.0 liter with a K03 'sport' turbo, and VW's dual-clutch DSG tranny (can't shift faster than this thing!). Just FWD, but it works. Stock is 200hp/209tq
Here's the plan for now:
-Neuspeed intake
-Kracka Vents (leaky PCV's are horriffic on these 2.0t motors for some reason!?!)
-EPL Stage 1 chip (raise boost to ~18psi, tune AFR and timing to some nice base levels, and improved fuel economy (over the 32-34mpg highway it already gets :) ) Similar chips advertise +50hp and +100tq (crank)
Later:
-forge DV (aka bov) unless something similar catches my eye
-ebay downpipe w/ cat delete
Goal: 200whp/240wtq on DB's dyno. Simple enough?
We started today with the neuspeed intake.
http://www.scheides.com/albums/gli/IMG_6865.sized.jpg
http://www.scheides.com/albums/gli/IMG_6866.sized.jpg
http://www.scheides.com/albums/gli/IMG_6867.sized.jpg
http://www.scheides.com/albums/gli/IMG_6868.sized.jpg
http://www.scheides.com/albums/gli/IMG_6870.sized.jpg
http://www.scheides.com/albums/gli/IMG_6871.sized.jpg
The stupid engine cover that comes on these cars stock is just dumb. We broke it getting it off, just a dumb design, as you have to just yank the crap out of it to get it off the rubber nubby things underneath it.
http://www.scheides.com/albums/gli/IMG_6872.sized.jpg
Of course, it cracked, and this engine cover is also the stock air box...no turning back now!
http://www.scheides.com/albums/gli/IMG_6873.sized.jpg
Yanking off the stock tube going from air box & maf to turbo:
http://www.scheides.com/albums/gli/IMG_6874.sized.jpg
Installing maf and intake pipe (note the sweet heat shield under it, she put that on too!):
http://www.scheides.com/albums/gli/IMG_6877.sized.jpg
All done!
http://www.scheides.com/albums/gli/IMG_6878.sized.jpg
Yes, I did help, but Anna did most of the work. If you have a 2.0t, I highly recommend this intake, great bang for the buck. Got it from Deviant Speed. Anna likes the new turbo sounds her car makes, you can *really* hear the turbo and DV now!
Kraka vents on sunday and then EPL chip goes on June 14 or 15th, should have some dyno numbers then :D
Well, as life goes, a year has gone by and no mods to it yet, so it is high time to get some stuff done! For those that don't know, this is a direct injection 2.0 liter with a K03 'sport' turbo, and VW's dual-clutch DSG tranny (can't shift faster than this thing!). Just FWD, but it works. Stock is 200hp/209tq
Here's the plan for now:
-Neuspeed intake
-Kracka Vents (leaky PCV's are horriffic on these 2.0t motors for some reason!?!)
-EPL Stage 1 chip (raise boost to ~18psi, tune AFR and timing to some nice base levels, and improved fuel economy (over the 32-34mpg highway it already gets :) ) Similar chips advertise +50hp and +100tq (crank)
Later:
-forge DV (aka bov) unless something similar catches my eye
-ebay downpipe w/ cat delete
Goal: 200whp/240wtq on DB's dyno. Simple enough?
We started today with the neuspeed intake.
http://www.scheides.com/albums/gli/IMG_6865.sized.jpg
http://www.scheides.com/albums/gli/IMG_6866.sized.jpg
http://www.scheides.com/albums/gli/IMG_6867.sized.jpg
http://www.scheides.com/albums/gli/IMG_6868.sized.jpg
http://www.scheides.com/albums/gli/IMG_6870.sized.jpg
http://www.scheides.com/albums/gli/IMG_6871.sized.jpg
The stupid engine cover that comes on these cars stock is just dumb. We broke it getting it off, just a dumb design, as you have to just yank the crap out of it to get it off the rubber nubby things underneath it.
http://www.scheides.com/albums/gli/IMG_6872.sized.jpg
Of course, it cracked, and this engine cover is also the stock air box...no turning back now!
http://www.scheides.com/albums/gli/IMG_6873.sized.jpg
Yanking off the stock tube going from air box & maf to turbo:
http://www.scheides.com/albums/gli/IMG_6874.sized.jpg
Installing maf and intake pipe (note the sweet heat shield under it, she put that on too!):
http://www.scheides.com/albums/gli/IMG_6877.sized.jpg
All done!
http://www.scheides.com/albums/gli/IMG_6878.sized.jpg
Yes, I did help, but Anna did most of the work. If you have a 2.0t, I highly recommend this intake, great bang for the buck. Got it from Deviant Speed. Anna likes the new turbo sounds her car makes, you can *really* hear the turbo and DV now!
Kraka vents on sunday and then EPL chip goes on June 14 or 15th, should have some dyno numbers then :D