MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Project Talk (http://www.mitsustyle.com/forums/forumdisplay.php?f=5)
-   -   My projects (http://www.mitsustyle.com/forums/showthread.php?t=18193)

brando 07-20-2008 06:30 PM

Re: My projects
 
WOOOOOT!!! so when do the vids come?

kittay 07-20-2008 11:37 PM

Re: My projects
 
I have one vid, but it sounds pretty gnarly from the open exhaust, makes it sound like some mad lifter tick :(

Plus when we fired it up, found a pin hole crack in the L pipe, so had to push it back to get that welded up. I'm almost done with the mount for the TT and EBC under the radio :)

kittay 07-22-2008 05:18 PM

Re: My projects
 
Since the engine bay is all finished up, starting back on the interior :)

Made a mount for the TT/ EBC. Here's how it looks now in the primer:
http://i59.photobucket.com/albums/g2...t/IMG_6847.jpg

kittay 07-28-2008 02:41 AM

Re: My projects
 
Lol.. Just keep finding things to fix/ improve.. and then more stuff.. lol

We took out the trailing arms today and ground them down a bit more for the 255 wides, and welded them to fix the tow problem. Got the 4 bolt in and the rear end all buttoned up.

I did some misc improvements as well. I'm sure no one cares or at least as much as me, but I'm happy :)

I got the stupid bumper sticker off.. That thing was gnarly bad, I spent 2 hours with it.
Before:
http://a858.ac-images.myspacecdn.com...c340b662d9.jpg

After:
http://i59.photobucket.com/albums/g2...t/IMG_6874.jpg

Also got a new wing on the drivers side, since the other one, the fiberglass was pretty cracked.
Then I took off the windshield washer guy. It looks alot better :)
http://i59.photobucket.com/albums/g2...t/IMG_6878.jpg

Pulled the Buschur exhaust and found this:
http://i59.photobucket.com/albums/g2...t/IMG_6872.jpg
So going to have to fix that..

kittay 08-05-2008 02:09 PM

Re: My projects
 
I'm getting so stoked!! Car is about to run!

Last night threw in the Supra pump and finished up the exhaust with a 3" electric cutout as well :)

But all I have left is to finish up the gauges then it's on to tuning!!!

Thought you guys should know :)

sleepydsm 08-05-2008 09:37 PM

Re: My projects
 
Looks great. Really nice build on the cherry, and all the others look nice too.

Have you considered chopping the "FRONT" (front of engine aka timing belt side) motor mount to look more like a 2G one? It cleans up the engine bay a bit. I also machined a small square to fit into the hollow mount and welded it for strength and just to give it a finised look.

And come on, where is the pretty aftermarket pointless colored timing belt? Greddy, HKS, Power Ent.? haha.. its a 2.0L right?

kittay 08-06-2008 01:30 AM

Re: My projects
 
I would, but kinda need/ want the power steering for the 255 wides.

Lol.. I really don't care for the colored timing belts.. lol.
It's a 2.0 for now. Next year it'll be a 2.3 :)

craig 08-07-2008 10:27 AM

Re: My projects
 
the colored belts are actually stronger kevlar re-enforced, but in no way worth the money they get for them

User Name 08-07-2008 10:44 AM

Re: My projects
 
I bought a pretty blue timing belt. Really wish I hadn't, but what's done is done and I have a timing belt now..that's blue.

kittay 08-08-2008 08:17 PM

Re: My projects
 
Ton of pics:

The brakes behind the 5zigens
http://i59.photobucket.com/albums/g2...t/IMG_6904.jpg

Cutoff:
http://i59.photobucket.com/albums/g2...t/IMG_6890.jpg

Cutoff switch for exhaust:
http://i59.photobucket.com/albums/g2...t/IMG_6900.jpg

The TT and EBC:
http://i59.photobucket.com/albums/g2...t/IMG_6896.jpg

Finally off jackstands:
http://i59.photobucket.com/albums/g2...t/IMG_6891.jpg

sleepydsm 08-08-2008 09:56 PM

Re: My projects
 
Quote:

Originally Posted by kittay (Post 250941)
I would, but kinda need/ want the power steering for the 255 wides.

I did it, and kept power steering. I just put that cast iron bracket (the power steering pump bracket is attached to it) in the band saw and trimmed the unneeded part that has two studs in it.

http://memimage.cardomain.com/member...714_5_full.jpg

Kevin 1G Drummer 08-09-2008 10:41 AM

Re: My projects
 
Quote:

Originally Posted by kittay (Post 251304)
Ton of pics:

Finally off jackstands:
http://i59.photobucket.com/albums/g2...t/IMG_6891.jpg

And it still rides like a 4x4. Haha ;)

Super Bleeder!! 08-09-2008 11:49 AM

Re: My projects
 
Its called a CUTOUT newb! ;) ~_~

kittay 08-09-2008 05:56 PM

Re: My projects
 
Quote:

Originally Posted by sleepydsm (Post 251308)
I did it, and kept power steering. I just put that cast iron bracket (the power steering pump bracket is attached to it) in the band saw and trimmed the unneeded part that has two studs in it.

http://memimage.cardomain.com/member...714_5_full.jpg



I'm a pussy little girl :)
So you just made it like a 2g style?

I have some lower springs, just unsure about cornering with the wide tires



Oh... But I drove it today :)
It is very loud! It feels like I have a hardcore system in the way it rumbles and makes the mirrors shake.. lol

FPred spools good and feels pretty good on only 15psi :)

kittay 08-10-2008 01:32 AM

Re: My projects
 
Oh and here's the vid:
http://i59.photobucket.com/albums/g2...h_MVI_6912.jpg
http://i59.photobucket.com/albums/g2...h_MVI_6911.jpg

kittay 08-16-2008 03:13 PM

Re: My projects
 
Got some pics from last night:
http://i59.photobucket.com/albums/g2...r/IMG_6945.jpg
http://i59.photobucket.com/albums/g2...r/IMG_6940.jpg
http://i59.photobucket.com/albums/g2...r/IMG_6939.jpg

Heading to the track with it in a bit :)

twack 08-16-2008 03:15 PM

Re: My projects
 
When is it going to see some paint

kittay 08-16-2008 04:56 PM

Re: My projects
 
Hahaha... when I can afford it :)

Right now I'm not working.. so yuh

sleepydsm 08-17-2008 05:04 AM

Re: My projects
 
Quote:

Originally Posted by kittay (Post 252354)
Hahaha... when I can afford it :)

Right now I'm not working.. so yuh

Do you get your stuff used or new?

kittay 08-17-2008 12:37 PM

Re: My projects
 
Most everything on the black cherry was used. Got good deals and stuff with low miles.


All times are GMT -5. The time now is 11:41 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.