MitsuStyle - My Talon

Page 18 of 29

« First

Last »

Show 40 post(s) from this thread on one page

MitsuStyle (http://www.mitsustyle.com/forums/index.php)

- Project Talk (http://www.mitsustyle.com/forums/forumdisplay.php?f=5)

- - My Talon (http://www.mitsustyle.com/forums/showthread.php?t=18991)

sleepydsm

05-31-2009 07:32 PM

Re: My Talon

Quote:

Originally Posted by mx3twinturbo (Post 292881)

Hey Now!!!

Hahahaha. Look at your sig :D

wheelhop

06-01-2009 08:20 AM

Re: My Talon

Quote:

Originally Posted by sleepydsm (Post 292841)

I had a 1/4 tank of e85. I'm about 190lbs., so maybe 3200w/driver?

Seems like my car has no low end and mid range power, it really doesn't launch hard. I think the 2G timing map on the car is too conservative.

Reguardless, I am really happy with what it ran, a lot quicker than I thought.

Wow thats over 500whp with that trap speed and weight. . .
Horsepower from ET.

4g63tcrazy

06-01-2009 02:07 PM

Re: My Talon

But he's only putting down a hair more than 400.. Hmm

Shane@DBPerformance

06-01-2009 02:13 PM

Re: My Talon

Low reading dyno...

4g63tcrazy

06-01-2009 02:20 PM

Re: My Talon

True...

wheelhop

06-02-2009 01:08 AM

Re: My Talon

Dynos are for tuning, not for dick flopping ;)

ET with an accurate weight equalizes and applies across the board as a fair comparison.

Shane55113

06-02-2009 04:31 PM

Re: My Talon

why are you selling your car?

wheelhop

06-04-2009 07:08 PM

Re: My Talon

Quote:

Originally Posted by sleepydsm (Post 292872)

i've done pretty much everything i've ever wanted with a dsm with this car (make over 400awhp on dd, run a decent 1/4 mile, and beat a very intimidating v8 car in a race where i was completely underestimated), and i've owned 1g awd's my entire life. I'm kinda ready for something new. I really like projects, and i actually complete them!

But we will see, because i have really put a ton of time and effort into this car, it really isn't worth selling!

. . . . .

sleepydsm

07-04-2009 01:58 PM

Re: My Talon

Got my front wheel bearings, sealls, ball joints, and outer tie rod ends. I should be doing all this front end work on Sunday. I may do a HOW TO write up! haha. I will also be doing rear calipers/rotors/pads before BIR.

sleepydsm

07-07-2009 02:56 PM

Re: My Talon

Finally did: New front wheel bearings, in/outter seals, New ball joints, outer tie rod ends, New loaded rear calipers, rear rotors, LF axel seal. Haha, my car is getting better all the time.

wheelhop

07-08-2009 11:06 PM

Re: My Talon

Maybe you won't sell it ? ? ?

sleepydsm

07-08-2009 11:25 PM

Re: My Talon

Quote:

Originally Posted by wheelhop (Post 296876)

Maybe you won't sell it ? ? ?

haha, I'll sell it if someone wants to buy a really nice 1G.

No one has even called to see it. boo.

4g63tcrazy

07-08-2009 11:31 PM

Re: My Talon

I'll call you to come see it and take her for a joy ride! haha

Swifty1638

07-08-2009 11:35 PM

Re: My Talon

Same here..lol

sleepydsm

07-29-2009 02:55 PM

Re: My Talon

Putting on a Magnus SMIM right now, and decided to do some kind of wire tuck, added 2G style injector plugs, etc

sleepydsm

07-31-2009 02:45 AM

Re: My Talon

1 Attachment(s)

Ooh shiney :). I mounted my coil pack today, hacked off my FIAV and sealed it up, and did a little wiring ;)

goodhart

08-03-2009 05:08 PM

Re: My Talon

Maybe I missed it, but what are your IDC with the 1650's and the HX40?

sleepydsm

08-05-2009 01:40 AM

Re: My Talon

Quote:

Originally Posted by goodhart (Post 299631)

Maybe I missed it, but what are your IDC with the 1650's and the HX40?

I think somewhere in the 40-60% range, don't remember.

goodhart

08-05-2009 01:48 PM

Re: My Talon

wow, thats pretty low. I could probably pull off 1200's with an HX35 then...

Shane@DBPerformance

08-05-2009 03:09 PM

Re: My Talon

1200s are good for around 480-500awhp on E85 on my dyno.

All times are GMT -5. The time now is 06:41 PM.

Page 18 of 29

« First

Last »

Show 40 post(s) from this thread on one page