Re: In the market for cams...
 

Are you positive about that? I know that FP cams are manufactured by Comp but I thought that what FP sells is not available under the Comp name?

Re: In the market for cams...
 

Well, thats what a pretty knowledgable guy on AF said. He said something like Fp sorta bought the rights to those cams to sell under their name. I'll check on that.

Re: In the market for cams...
 

What's AF?

Here ya go, straight from the mouth of Robert Young: http://www.dsmtuners.com/forums/show...1&postcount=88

Re: In the market for cams...
 

AF = automotiveforums.com

Hmmmm, thats interesting. So they are pretty close but not exactly alike? Would going with the 101200's be a bad choice considering they are $360 shipped on eBay compared to $430 +shipping from FP?

Re: In the market for cams...
 

i also read something from Robert saying Comp switched their cams over to the FP spec centerlines, so now they sell exactly the same product. :)

Re: In the market for cams...
 

I run Crower 415's with Crower spings and didn't have a problem at 8k with the springs. You should be fine with any of the cams listed above and the crower springs. Get too big and you will need to check the clearance to the guides. I had to have mine shaved down a bit with the big cams in there.

Idle sounds really nice at 1,200 rpm (bad ISC motor) and it never dies at stop lights or anything.

Re: In the market for cams...
 

RRE tells me that the HKS 280s won't be available until the end of June, taking preorders right now.

Decisions...

Re: In the market for cams...
 

I'm pulling the trigger... Putting money down on HKS 280s through RRE.

Re: In the market for cams...
 

woad wace

Re: In the market for cams...
 

Nice! what are they going for?

Re: In the market for cams...
 

$650 is what Ty emailed me back with. They said they'd call me tonight to get my payment information. The cams are expected to arrive near the end of June.