MitsuStyle
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Turbo / Engine / Drivetrain (http://www.mitsustyle.com/forums/forumdisplay.php?f=91)
-   -   Turbo upgrades! (http://www.mitsustyle.com/forums/showthread.php?t=11406)

slowbubblecar 05-13-2006 04:54 PM
Re: Turbo upgrades!
 
Quote:
Originally Posted by sleepydsm
For a nice 2G intercooler, I suggest the 'AGP Turbo' 2g FMIC kit. Turbo choice? Any kind of 16G will be plenty for your goals. But if you're gonna get all the fuel stuff, and a FMIC, why not take advantage of all that and what the stock engine can handle? Why not consider a PTE SCM "50 trim"? I have a BR 20g on my car right now; 20Gs are hard to find at a good price. I have to say my 20G is barely laggy. If there is any lag, its nothing to bitch about, and its just overall a nice turbo.
Injector size? again, if you go with a 16g, you'd probably be fine with 550cc's. Anything bigger I'd say get maybe 650cc or bigger.
When JasonR put down 423 on your turbo, he only had 550's in his car.

98gstaherns 05-14-2006 09:30 PM
Re: Turbo upgrades!
 
Big 16g ported for $300...Good deal or no? But would it be ok to run on my stock fuel system and intercooler at low PSI..

CornFed2.4 05-14-2006 09:50 PM
Re: Turbo upgrades!
 
what do you consider low boost??? Good deal if new decent if used but in perfect shape ie no shaft play

98gstaherns 05-14-2006 09:53 PM
Re: Turbo upgrades!
 
10 ish i dunno for sure

CornFed2.4 05-14-2006 11:21 PM
Re: Turbo upgrades!
 
someone correct me if I wrong but you have to run stock boost unless U get an external wastegate

98gstaherns 05-14-2006 11:33 PM
Re: Turbo upgrades!
 
See i just want to replace mine because i'm starting to think it is gonna go soon. Gonna have it look at tomorrow. But Hopefully i an get my Daily driver fixed so i can wait. But i need to get injectors 550, fuel pump, safc and a new intercooler set up!

98gstaherns 05-14-2006 11:57 PM
Re: Turbo upgrades!
 
This is what he told me about the turbo!
The turbo is in good shape. It has a little surface rust on the wastegate actuator. It won't affect anything, but you could sand it down and paint it. I'm not sure on the miles as I bought it as a project that I never completed. It has very, very minimal shaft play. It definitly won't need a rebuild any time soon

98gstaherns 05-15-2006 12:09 AM
Re: Turbo upgrades!
 
Do i need a 1g manifold for a big 16g?

CornFed2.4 05-15-2006 12:22 AM
Re: Turbo upgrades!
 
Quote:
Originally Posted by 98gstaherns
Do i need a 1g manifold for a big 16g?
no, youll need an install kit J-pipe ect. stick with the 2g mani it flows alot better

98gstaherns 05-15-2006 12:33 AM
Re: Turbo upgrades!
 
Oh ok..Yea i know a ineed a install kit..But i thought it wouldn't fit the 2g mani. Thanks

Jakey 05-15-2006 08:15 AM
Re: Turbo upgrades!
 
Quote:
Originally Posted by 98GSX
someone correct me if I wrong but you have to run stock boost unless U get an external wastegate
False.

Quote:
Originally Posted by 98GSX
no, youll need an install kit J-pipe ect. stick with the 2g mani it flows alot better
2G manifolds do not have the cracking issues that the 1G manifolds have.

98gstaherns 05-15-2006 12:05 PM
Re: Turbo upgrades!
 
Ok no i need a little input about these injectors... http://www.extremepsi.com/store/cust...cat=429&page=1 Now for the Qty. Do i just leave it at one? Does it mean 1 set of them..

Jakey 05-15-2006 12:13 PM
Re: Turbo upgrades!
 
I would certainly hope the 1 is for 1 set of injectors considering the price.

Wow.....

98gstaherns 05-15-2006 12:27 PM
Re: Turbo upgrades!
 
Yea thats what i thought but i was just really confused...Sorry i'm dumb sometime...I like just going to a place and buying not over the internet B.S..

sleepydsm 05-15-2006 12:48 PM
Re: Turbo upgrades!
 
Buying over the internet can usually net you better deals than you could get from a local shop.

Jakey 05-15-2006 02:09 PM
Re: Turbo upgrades!
 
Quote:
Originally Posted by 98gstaherns
Yea thats what i thought but i was just really confused...Sorry i'm dumb sometime...I like just going to a place and buying not over the internet B.S..
ExtremePSI is a very reputable vendor that has been with the DSM community for quite sometime. I would have no problem purchasing from them.

98gstaherns 05-15-2006 03:13 PM
Re: Turbo upgrades!
 
Oh yea i trust them but i just like talking and asking people!

98gstaherns 05-16-2006 02:59 PM
Re: Turbo upgrades!
 
Ok here is gonna be the set up so far!
Fuel:
Walbro 225 fuel pump
660's injectors
S-afc II
Turbo:
Big 16G ported
Intercooler:
FMIC still trying to find one for a good deal

Shane@DBPerformance 05-16-2006 03:35 PM
Re: Turbo upgrades!
 
Quote:
Originally Posted by Speedfreak

A non rewired 190 pump will take you to 397whp amazingly. Thats a long story, many many moons ago, when I ordered my 255hp fom Busher, he sent me a 190, and I didn't find out till it maxed on the dyno(years later). But why even bother, just get the 255.
That wasn't even a 190, that was an old Denso 150-160 that they used to sell ages ago.

1QUICK4 05-16-2006 04:02 PM
Re: Turbo upgrades!
 
Quote:
Originally Posted by M/// Guy
CVD made 320fwhp I think with his 16G, ahh those were good times.
I hit 308WHP with my Big 16G, 550's, Supra 255 pump, and a SupraSMIC on my old Laser.
(with Shane tuning of course ;) )

Quote:
Originally Posted by Jakey
2G manifolds do not have the cracking issues that the 1G manifolds have.
2G manifolds crack just like the 1G's do, just not quite as fast.


All times are GMT -5. The time now is 03:47 PM.
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.