MitsuStyle
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Turbo / Engine / Drivetrain (http://www.mitsustyle.com/forums/forumdisplay.php?f=91)
-   -   So I'm thinking about a twin turbo setup... Opinions? (http://www.mitsustyle.com/forums/showthread.php?t=15611)

Super Bleeder!! 05-22-2007 01:56 PM
Re: So I'm thinking about a twin turbo setup... Opinions?
 
Quote:
Originally Posted by Pushit2.0 (Post 193568)
just get a GT5591.5 and call it good.

one of my buddies in AZ has one of those on his 408ci turbo trans am.

Goat Blower 05-22-2007 02:27 PM
Re: So I'm thinking about a twin turbo setup... Opinions?
 
Quote:
Originally Posted by EclipseGST (Post 193608)
I ran 42psi last year on the 42 with ARP's and the OEM head gasket with no o-ring. Never saw any problems.

If I could find some A1's I would be happy, but right now I do not have any. So there for they are not on my modification list. :)

I know Marco had a few sets awhile back, maybe I should get in touch with him again and see if he received and still has a set in stock.
He's got six sets as of last week, probably down to one or two by now.

Goat Blower 05-22-2007 02:28 PM
Re: So I'm thinking about a twin turbo setup... Opinions?
 
Quote:
Originally Posted by ecoli (Post 193474)
Rau's current 80mm turbo spools at about my revlimiter.
I thought Brent said he had an 81mm. I might have heard wrong.

EclipseGST 05-23-2007 12:51 AM
Re: So I'm thinking about a twin turbo setup... Opinions?
 
Quote:
Originally Posted by Goat Blower (Post 193677)
He's got six sets as of last week, probably down to one or two by now.
Ordered the last set about 10mins after I posted that. Should be here by the end of the week. ;)


Parts sure accumulate fast!

Swifty1638 05-23-2007 02:00 AM
Re: So I'm thinking about a twin turbo setup... Opinions?
 
lol.

As for rau, I also thought it was a 81 or 84mm turbo. But, I never know anything, so whatever. ;)

-A. Swift

FattyBoomBatty 05-23-2007 05:24 AM
Re: So I'm thinking about a twin turbo setup... Opinions?
 
Quote:
Originally Posted by Swifty1638 (Post 193808)
lol.

As for rau, I also thought it was a 81 or 84mm turbo. But, I never know anything, so whatever. ;)

-A. Swift
You don't know that.

Shane@DBPerformance 05-23-2007 10:55 AM
Re: So I'm thinking about a twin turbo setup... Opinions?
 
Actually I think it's a 78mm for NHRA now.

Shane@DBPerformance 05-27-2007 09:29 PM
Re: So I'm thinking about a twin turbo setup... Opinions?
 
They have now changed the rules for the 4G63 motor specifically, he will be forced down to a 74mm turbo soon.

JET 05-27-2007 11:11 PM
Re: So I'm thinking about a twin turbo setup... Opinions?
 
That is BS! 4g63's own all so now they have to put a limit on him, that is ghey. Do they specifically say 4g63 or Mitsu 4 cylinders? It could be a good time to switch to a 4g64 :D

Shane@DBPerformance 05-28-2007 12:35 PM
Re: So I'm thinking about a twin turbo setup... Opinions?
 
It says 4G63 specifically, but they also have a wieght section for the "4G63" that has 2 breakdowns. One for up to 2.4 liters, and a higher weight for 2.41 to 2.5 liters. So I assume any 4G varients are meant to fall under

1ViciousGSX 05-28-2007 04:09 PM
Re: So I'm thinking about a twin turbo setup... Opinions?
 
Toyota and Honda are probably putting pressure on NHRA to slow him and Shep down, they make them look really bad.

Super Bleeder!! 05-28-2007 05:02 PM
Re: So I'm thinking about a twin turbo setup... Opinions?
 
We cant complain too much, they did the same thing to the Ecotecs.

DSM_421 05-28-2007 05:21 PM
Re: So I'm thinking about a twin turbo setup... Opinions?
 
Quote:
Originally Posted by tpunx99GSX (Post 193329)
lol shits so badass.


All times are GMT -5. The time now is 08:18 AM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.