Re: Im a dsmer again!
 

and yes its silver. It has been repainted. but it will be repainted again. i would like a darker shade of gunmetal.

Re: Im a dsmer again!
 

Make sure you install a fire extinguisher in the cabin too. :D

Re: Im a dsmer again!
 

How Could i forget?
http://c2.ac-images.myspacecdn.com/i...9c10d7c5ed.jpg

Re: Im a dsmer again!
 

oh noes!!!!!

Re: Im a dsmer again!
 

Oops, Edited, i was mistaken.

Re: Im a dsmer again!
 

Well the dsm is now at its home here in maple grove. It was fun towing the dsm on the dolly in shitty weather with a v6 explorer, but all in all, uneventfull, no break downs no issues. Now im going to have my fiance and her sister help me push it up the driveway along with the snowblower! WOOT.

Re: Im a dsmer again!
 

LOL, I can't help but laugh at the thought of that.

Re: Im a dsmer again!
 

Haha, good to see you back in the game Tom. Just remember, if you don't know, don't guess, just ask. Good help is usually a pm away or a search.

Re: Im a dsmer again!
 

Will do. Its nice to have people i trust local. Really didnt trust many shops down there. :)

Re: Im a dsmer again!
 

He for sure still knows that R on the shifter is for "Race mode". :loser:


















Sorry Tom, just couldn't help it.

Re: Im a dsmer again!
 

^ha ha ha. I forgot about that

Re: Im a dsmer again!
 

Don't forget about the fire sale.

Re: Im a dsmer again!
 

did you not see the picture earlier? eyes must be leavin ya old man. :)

Re: Im a dsmer again!
 

Man I wish I could post the video of when you had Oko and Ryan in the car and Oko was asking if you ran 12s. Good times.

Re: Im a dsmer again!
 

well im at the oil pan now, getting ready to drop it, just need to warm up my fingers a bit. I have 7 or 8 bolts off now, two of them are going to be a real bitch. Aftermarket oil pan for the loss. :)

Re: Im a dsmer again!
 

By the way...
Does anyone local or close to maple grove have any moly lube for the bearings? or know where i can get some?
I found my torque wrench, i thought i had left it in california but turns out it was in the back of one of the drawers in my box.

Re: Im a dsmer again!
 

NO DAMAGE TO THE CRANK!!!! WOOO WOOO. Looks smooth as a babys bottom. no scratchs or anything. The rod cap did fall off on the number 4 piston. (by the way, manley rods look freakin beautiful). I will be needing 1 rod bolt though because it was bent. on the rod itself towards the outer edge where the bolt screws into will need to be grinded just a tad in order for the rod cap to sit flush again because there was a gouge in it. im just super thankful there was no damage to the crank or the rod where the bearing goes.

Re: Im a dsmer again!
 

There was just a thread on where to get ARP moly lube, go to DB, it's close to MG.
Unless you're just talking about assembly lube, then any oreillys should have that.

edit: I'd also consider buying a new rod at that point. Why mess around with gouged parts that you had to file down to fit right, especially on a part like that. Plus the rod bolt bent? Sounds like it's pretty messed up.

Re: Im a dsmer again!
 

Just got to orilleys for the lube. I would go to the one in brooklyn center off of john martin drive and hwy 100. Craig on here is the manager of the store and we have a huge style discount there.

Re: Im a dsmer again!
 

Actually I have a huge tube of moly assembly lube, you can use it if you want, I'll probably never use it all. Come to the meet on Wednesday and I'll bring it.