Re: 1991 talon 500 hp project
 

You BETTER make over 500 on THAT dyno....

Re: 1991 talon 500 hp project
 

I don't think there's anything that magical about Curt Browns 499hp 16G setup. He had basically EVERYTHING for supporting mods, and I think he was running like 12.5:1 compression or something crazy. I still think it was kind of odd having peak torque up at 5-5500, and much lower than the hp. My torque was about 120 higher at 4 grand.

It can be hard to compare one dyno to the next. Plus my dynochart from MAP shows SAE correction, not STD. I've done some quick checking and everything was basically showing a 2.6% advantage using STD over SAE. Now I also saw someone who got a 4.9% difference between the two.

Re: 1991 talon 500 hp project
 

I am thinking that the cams have a very late IVC which lowers the overall dynamic compression of his pistons, thus resulting in more airflow at the cost of spool and MBT. I was going to say, didn't Jrohner make around 430 AWTQ (on the omgjet) with his 16g setup?

Re: 1991 talon 500 hp project
 

here is the turbo im getting of my buddy's 420a

Attachment 9621

Re: 1991 talon 500 hp project
 

Well If I do it will be at a dyno day because I will be going to shane for my new tune.

Re: 1991 talon 500 hp project
 

Ahhhhh... You know that turbo won't bolt up to your car right??? Get a turbo meant for a turbo dsm.

Re: 1991 talon 500 hp project
 

Nice color 1G.

One thing I wanted to mention was not to waste your money on upgraded fuel lines. Stock 1G lines go a long way. An upgraded feed-line may be appropriate, but other than that, unneccessary.

Re: 1991 talon 500 hp project
 

how will it not Fit ?

Re: 1991 talon 500 hp project
 

It looks like that turbo is welded to the manifold, and a turbo setup for a 420A won't bolt on to a 4g63 unless it's a t3 turbo, and you'll need a t3 manifold for a 4g63 to even get that to bolt on.

Re: 1991 talon 500 hp project
 

if i was going to run it. id do a t3 flanged manifold top or bodom mount

but its for sure a T3/T04E turbonetics Compressor Housing - 60-1 Compressor Wheel - F1-62 Turbine Wheel - Standard Housing - .63 A/R fully clockable the whole thing comes apart easy 5 bolts to take off on exhaust side from the center section and 4 for the compressor side off the center section and another 6 on the compressor side around it

best part it was free ill post pictures

like i said earlier im my post going to max out the e16 first then try to run this or fix it and sell it

Re: 1991 talon 500 hp project
 

if your looking to get rid of that 16g im in need of one for my project. lmk

Re: 1991 talon 500 hp project
 

Re: 1991 talon 500 hp project
 

It's great that you guys can buy new parts for so cheap. My X mani was nearly 4x the price.

Re: 1991 talon 500 hp project
 

Well you're buying good quality stuff. Megan racing stuff, I would not expect a manifold like that to last...maybe it will, I'll eat my words...their o2 housings for the evo8/9 have proven very reliable...but idk, plenty of those cheap manifolds crack pretty quick! I'm sure they'll have a manifold for the X for about $200 pretty soon too, but I doublt it'll stack up to your FR manifold ;)

Re: 1991 talon 500 hp project
 

The one car that the Ebay/Megan racing manifolds don't seem to work on is DSMs. They work great on supras, hondas, 240s, etc though!

Re: 1991 talon 500 hp project
 

if you want to get rid of that 16g pm me im in need of one. if its a real one

Re: 1991 talon 500 hp project
 

In case he didn't see your post 5 posts above?

Re: 1991 talon 500 hp project
 

i dont think he did lol..since he replied after my post but didnt give me an answer

Re: 1991 talon 500 hp project
 

Just PM him. He can't miss that :)

Re: 1991 talon 500 hp project
 

here are the pictures of the turbo i got


Attachment 9644

Attachment 9645

Attachment 9646

Attachment 9647