MitsuStyle
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Brakes / Body / Suspension (http://www.mitsustyle.com/forums/forumdisplay.php?f=92)
-   -   wont start (http://www.mitsustyle.com/forums/showthread.php?t=24384)

123abc 09-18-2009 02:46 PM
Re: wont start
 
Quote:
Originally Posted by TurboDomestics (Post 305794)
Have you ever checked the ECT sensor (Engine Coolant Temp), when they go bad they give a ridiculous temp reading and the ecu doesnt know what to do. Ive had a few of those go bad causing many a headache.

This is why I asked about the CEL that he said it has. When mine is unplugged it'll flood my car out causing it not to start. (obviously)

TurboDomestics 09-18-2009 07:36 PM
Re: wont start
 
Quote:
Originally Posted by 123abc (Post 305807)
This is why I asked about the CEL that he said it has. When mine is unplugged it'll flood my car out causing it not to start. (obviously)
Sometimes the lil bugger wont even throw a CEL....

Powers 09-18-2009 08:03 PM
Re: wont start
 
cant get the code till sunday

Powers 09-26-2009 07:55 PM
Re: wont start
 
ok so a week later i finally got the codes. there are 4 of them please someone brighten my day and help me out the codes are... po325pd. po150. po325. po174. dont understand y there are two 325? but thats what the code reader said

4seasons69 09-26-2009 08:32 PM
Re: wont start
 
Quote:
Originally Posted by alliance14 (Post 307014)
ok so a week later i finally got the codes. there are 4 of them please someone brighten my day and help me out the codes are... po325pd. po150. po325. po174. dont understand y there are two 325? but thats what the code reader said
p0150 is an o2 sensor circuit malfunction (bank2 sensor 1)

p0174 is a system too lean (bank 2)

p0325 is a knock sensor circuit malfunction

Powers 09-26-2009 08:48 PM
Re: wont start
 
So which would cause it to not start the knock sensor?

Powers 09-27-2009 06:47 PM
Re: wont start
 
So who has got some ideas?!?!

123abc 09-28-2009 08:43 AM
Re: wont start
 
The knock sensor shouldn't be the one to cause it to not start, it just won't idle or run very good.


I would start by locating the knock sensor and inspecting the sensor itself, the connection and the wires.

Powers 09-30-2009 01:58 AM
Re: wont start
 
So I FINALLY got the car started!!! Two months later :(but hey got her done well close still gotta pit fluid in tranny connect a couple belts and bleed the clutch brakes and power steering

EclipseGST 09-30-2009 10:35 AM
Re: wont start
 
So what was it?

Powers 10-01-2009 12:41 AM
Re: wont start
 
Couple wires disconnected bad ground and battery was not turning fast enough


All times are GMT -5. The time now is 07:32 AM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.