MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Project Talk (http://www.mitsustyle.com/forums/forumdisplay.php?f=5)
-   -   Project Lex (http://www.mitsustyle.com/forums/showthread.php?t=28018)

C3L1CA 08-17-2011 11:11 PM

Re: Project Lex
 
Oh snaps! Good luck!

scheides 08-17-2011 11:36 PM

Re: Project Lex
 
Wah-hoo!

cmspaz 08-18-2011 12:00 AM

Re: Project Lex
 
You just couldn't stay away, could you?

Welcome to the fun side!

Pushit2.0 08-18-2011 12:50 AM

Re: Project Lex
 
Holiday in MG? dang. E85ish FTW.

~John

Murlo26 08-18-2011 09:23 AM

Re: Project Lex
 
Hey thats my E85 pump :) Same holiday I use typically on Central there.

Grats! I need to stop by and see your car when I get back in town.

turbotalon1g 08-18-2011 07:16 PM

Re: Project Lex
 
^Your pump my ass, you don't even use it! lol.

Good luck B.

Halon 08-19-2011 04:05 PM

Re: Project Lex
 

http://www.youtube.com/watch?v=59L06JGwnrc&hd=1

A//// Guy 08-19-2011 04:27 PM

Re: Project Lex
 
Ballllin!! Love the video haha. Gotta have nav, and some nakka beats.

Halon 08-19-2011 04:30 PM

Re: Project Lex
 
Green for tha moneys, Nav for tha honeys.

GsXtUrBo98 08-19-2011 05:17 PM

Re: Project Lex
 
Lookin sweet man I'm also diggin the navigation and music. Nice little round about

scheides 08-19-2011 05:27 PM

Re: Project Lex
 
Nice! How does it feel, rippin around in it? Can't wait for a ride in this thing.

Murlo26 08-19-2011 06:50 PM

Re: Project Lex
 
Looks like fun for sure!

95talonracer 08-20-2011 01:39 AM

Re: Project Lex
 
Nice !!

Kevin 1G Drummer 08-20-2011 07:29 PM

Re: Project Lex
 
No wheel spin in 3rd no care. Haha jk, Nice progress! It's nice to see this is up and running, now get it tuned!

Halon 08-30-2011 06:00 PM

Re: Project Lex
 
Brief update:

Installed new Dist Cap and rotor for good measure, and because they are cheap
http://www.clublexus.com/forums/atta...-new-rotor.jpg

New IS300 ignition setup has arrived (to be installed this winter)
http://www.clublexus.com/forums/atta...1&d=1314666512

Raw materials from Discount Steel to make my own intake manifold this winter because I refuse to pay $800+ for just a plenum
http://www.clublexus.com/forums/atta...1&d=1314666512

Yesterday
http://www.clublexus.com/forums/atta...1&d=1314666512

Big thanks to Shane at DB Performance for the dyno time. Never made a clean pass due to misfires above 8psi. Also found I made a mistake hooking up my wastegate. So because of those two problems I went home with a small TO-DO list, and a couple spare parts from Shane's SC300. I fixed my WG issue. And using Shane's parts, troubleshot my misfire problem to the coil, must be old and degraded. Luckily I had a spare Junkyard coil in the garage. Turns out it works like a champ. Car is boosting at about 10-12psi right now, AFR's in the 11's, but I'm going to stay out of boost for the most part until I can get back on the dyno, which should be next week.

Junkyard spare coil installed:
http://www.clublexus.com/forums/atta...kyard-coil.jpg

Pile O Troubleshooting parts, thanks again Shane :)
http://www.clublexus.com/forums/atta...c300-coils.jpg

Murlo26 08-30-2011 07:53 PM

Re: Project Lex
 
Nice! Awesome update...keep it up. Can't wait to see some numbers. Glad its coming together man.

A//// Guy 08-31-2011 08:45 AM

Re: Project Lex
 
Woot and toot! Cant wait to see some numbas.

Halon 08-31-2011 04:31 PM

Re: Project Lex
 
Yeah, a whole 250hp @ 10psi probably... LOLz :)

turbotalon1g 08-31-2011 08:42 PM

Re: Project Lex
 
green bean makes a lot more than 250, i'd say 350/350.

Car feels fucking awesome and all the sounds are overwhelming. It's definitely moving a lot of car and it moves it well.

I can't wait to see what it does after the tune.

Halon 08-31-2011 10:20 PM

Re: Project Lex
 
Cool thanks man, glad you like it. I do love how loud the turbo is, and the exhaust tone of this car. Just need to recirc my wastegate dump, not a fan of the loud annoying blahhhh. Drowns out the much better sounds like the turbo and sexay exhaust tone. I have some flex exhaust tubing on the way. And thanks for hooking me up with those small straight sections that I can use, it'll be perfect for what I'm planning I think.

Car is still running like a champ. So I'm not going to touch a thing until dyno day. So for the time being, started planning some misc stuff. Since I'll be making my own Intake Mani, I was thinking about what to do for vacuum ports on it. So made this crude drawing showing the simplest and cleanest way to run to run these lines. It involves using a couple Tee's which I'm not 100% a fan of, but seems like it would end up being the cleanest and simplest way of doing things, because some of them it means I only have to run one line and the 2 components are somewhat close to each other so then I just Tee it right near the components, rather than running 2 separate lines. Just a little simpler and cleaner. And where I use a Tee, I use a larger line feeding the Tee which is 2 smaller lines to hopefully reduce any issues with pressure loss or whatever could be caused from running a Tee.

But, interested to hear other peoples thoughts...

http://www.clublexus.com/forums/atta...1&d=1314849238


All times are GMT -5. The time now is 10:10 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.