MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Project Talk (http://www.mitsustyle.com/forums/forumdisplay.php?f=5)
-   -   91 Galant VR4 (http://www.mitsustyle.com/forums/showthread.php?t=24090)

Speedfreak 09-28-2010 08:13 PM

Re: 91 Galant VR4
 
Quote:

Originally Posted by Matt D. (Post 359499)
Any idea what would cause that?

Ramp rate and inertia.

Shane@DBPerformance 09-28-2010 08:33 PM

Re: 91 Galant VR4
 
Decel fuel cut might not turned on or set right. Or idle motor is open too much or not enough BOV. But might just be the decel fuel cut, even if it has too much air after letting off the throttle, it will need fuel to keep going up in rpms.

Pushit2.0 09-28-2010 08:50 PM

Re: 91 Galant VR4
 
I need to work on the decel fuel settings, I have put as little effort in drivability with the stupid 160lb injectors as possible. I will focus more on that next year with the ID2200's.

As for the BOV no one is really sure if it works or not, I can not hear it and there is no good video from the dyno to see it in operation.

~John

FattyBoomBatty 09-28-2010 11:08 PM

Re: 91 Galant VR4
 
I was too busy trying to see some glowing headers like all the youtube vids. Anyway, you already know it works and sounds like a shotgun.

MustGoFaster 09-28-2010 11:24 PM

Re: 91 Galant VR4
 
Quote:

Originally Posted by FattyBoomBatty (Post 359524)
You already know it works and sounds like a shotgun.

LOL!

niterydr 09-29-2010 01:18 PM

Re: 91 Galant VR4
 
John,

Send me your map and a few log and I'll fix your decel fuel setting/get that bitch to ride the rev limiter like Ryan's car did.
swanny09@yahoo.com

Mark Leasure 09-29-2010 10:33 PM

Re: 91 Galant VR4
 
Hey if you are going out again this year I can borrow you my QTP’s and Rota’s. I don’t think there would be any off set/back spacing issues. My season is over with the 1G, as you witnessed at cedar falls. I bet you could break 150 MPH with them, and get in to the 9’s.

Pushit2.0 09-29-2010 10:47 PM

Re: 91 Galant VR4
 
I am 4 lug right now, I plan to do a 5 lug conversion before I turn the power up, but it may be possible to get that done before the last day at rock falls. I will let you know tomorrow night, thanks.

And yes I saw, I was 2 car behind you. That sucks about your break, do you know what let loose yet?

~John

95talonracer 09-29-2010 10:49 PM

Re: 91 Galant VR4
 
Quote:

Originally Posted by Mark Leasure (Post 359658)
Hey if you are going out again this year I can borrow you my QTP’s and Rota’s. I don’t think there would be any off set/back spacing issues. My season is over with the 1G, as you witnessed at cedar falls. I bet you could break 150 MPH with them, and get in to the 9’s.

What happened?

Mark Leasure 09-30-2010 07:44 AM

Re: 91 Galant VR4
 
Front differential is destroyed. Good time to upgrade.

DSMPARTSGURU 09-30-2010 12:31 PM

Re: 91 Galant VR4
 
sorry mark, but you won me $5.....

As soon as they said that the drivers and crews would have ot clean up there messes, I bet the guy next ro me that it there would be some catastrophic failure in the first 5 pairs....

Pushit2.0 10-02-2010 05:03 AM

Re: 91 Galant VR4
 
This is one of many videos to come, the last dyno run of the night. This is on E85 running 38psi with the AEM EMS V2 tuned by Shane @ DB Performance.

There are close up shots of the dyno charts in post #485


http://www.youtube.com/watch?v=Buz0GmjLCDU&hd=1

~John

scheides 10-02-2010 09:42 AM

Re: 91 Galant VR4
 
Muahahah! Coming to MAP today? Somebody sandbagging for top whp prize I see? SO awesome!

Pushit2.0 10-04-2010 01:23 AM

Re: 91 Galant VR4
 
That video was from a few weeks ago, I did plan to drive the car to the event. My car fund is low, so I did not plan to dyno.

After the track I knew I had a radiator leek, and my oil level was 1/2 quart higher after my last run of the day. So I fixed the radiator leak only to find I was getting coolant in my oil. After a little run time I had a 1 quart of water in my oil. So I pulled spark plugs and found the #2 plug was wet and standing water in the cylinder.

So I bought a head gasket at MAP thinking it was that, we pulled the head off the car saturday night. Only to find the head gasket and cylinder head looked great. Then I looked in the #2 cylinder to find the problem.

The #2 cylinder wall has a 3-4" long vertical crack in it. So the block is junk. I will pull the motor out and do a full tear down this week. I might be able to have this running mid next season.

http://www.mitsustyle.com/photopost/...P311010021.JPG
http://www.mitsustyle.com/photopost/...P311010022.JPG
http://www.mitsustyle.com/photopost/...P311010042.JPG
http://www.mitsustyle.com/photopost/...P311010043.JPG
http://www.mitsustyle.com/photopost/...P311010041.JPG
http://www.mitsustyle.com/photopost/...P311010025.JPG

~John

awd-drifter 10-04-2010 01:31 AM

Re: 91 Galant VR4
 
crappy! hope it goes even better for the next build john!

carltalon 10-04-2010 05:23 AM

Re: 91 Galant VR4
 
That sucks I was hoping to see it run this weekend at the test and tune.

goodhart 10-04-2010 10:14 AM

Re: 91 Galant VR4
 
Ugh. What a kick in the pants. Sorry to hear man.

turbotalon1g 10-04-2010 10:42 AM

Re: 91 Galant VR4
 
Quote:

Originally Posted by carltalon (Post 360259)
That sucks I was hoping to see it run this weekend at the test and tune.

x2.

TkrPerformance 10-04-2010 11:33 AM

Re: 91 Galant VR4
 
that really sucks

Matt D. 10-04-2010 11:35 AM

Re: 91 Galant VR4
 
Damn, John. :( I'm glad it was caught early on and didn't cause some other catastrophic failure.


All times are GMT -5. The time now is 08:45 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.