Re: MAP Event @ BIR: Results!
 

Sounds like an awesome time was had, and some crazy times were put down!

Whos Porsche 928 was that, and how fast did it go?

Re: MAP Event @ BIR: Results!
 

The E85 campfire was pretty awesome. :)

Re: MAP Event @ BIR: Results!
 

Here's a video of the supra wheelie http://www.youtube.com/watch?v=TByUcmcMkLc

Re: MAP Event @ BIR: Results!
 

+1

Badass!

Re: MAP Event @ BIR: Results!
 

I got to wait to get back to the room to see all the media, but it sounds like this could be one of the best racing weekends of the year, awesome they didn't hassle anyone about times or speeds.

Re: MAP Event @ BIR: Results!
 

Thanks to everyone that made it out, it was a blast! We have several ideas on how to improve the event next year and would really appreciate input from those that attended. Keep your eyes peeled for that thread in the MAP forum later today or tomorrow!

Re: MAP Event @ BIR: Results!
 

Good to hear, will help with what I thought worked and what could improve for sure.

Re: MAP Event @ BIR: Results!
 

I don't know who's it was but it ran mid 9's consistenly. Powered by GM.

Re: MAP Event @ BIR: Results!
 

I am happy to report that the though the ignition source took a little work to ignite the E85 campfire, we pulled the logs and saw no knock! Nice slow even burn, lol

Re: MAP Event @ BIR: Results!
 

Yea, our AFRs were nice and rich though, probably around 10:1 on a gas scale.. took 2 books of matches to light :lol:


"Government Motors" (anybody else think that announcer just didn't give a fuck?)

Re: MAP Event @ BIR: Results!
 

Lmao, also his pronunciation of mitsubishi.."1991 mitsubitchi eclipse"...hahaha. That's how ya say it when you're from up nort

Re: MAP Event @ BIR: Results!
 

Thanks for holding the event MAP. I had a good time. Thanks to everyone who helped me through my broken axle situation. Momin's car gave it's rear bumper to get us the parts.

I replaced the axle Saturday morning. Did 1 pass and the car just shut off on me (battery issue). Fixed it and was able to get one more pass in before competition started, but the car was missfiring bad. It's running very lean, and nothing I do in Link is working. It was mentioned that one of my 255's may have died, which kind of make sense. So that's when I decided to just call it quits and not compete, as I still had to drive the car home. Would have been real fun to compete, but oh well. It was nice to sit in the stands and watch some badass Q16 cars, and see the AWD competition!!

Congrats to everyone, lots of good times this weekend. I was pumped about my 10.93 @137. If anyone has a vid of it, please post it as my camera ran out of memory while my g/f was trying to record it :(

Re: MAP Event @ BIR: Results!
 

Bummer Brandon on the possible pump and camera running out of memory. It had to be tough sitting in the stands watching the competition as we certainly missed your car.

Hopefully someone has one of my 11.1 passes on video as I have nothing. :(

Re: MAP Event @ BIR: Results!
 

Thanks again, MAP for an awesome weekend I know all of us at the PRIMO Booth had a great time,
I will post up some Pics and vids of what I filmed, I keep forgetting my cameras at my house!, I have a few drag runs, and a bit of drifting, some car show photos and such, Im hopping to grab them today when i stop home to walk Turbo,(my chihuahua)

Re: MAP Event @ BIR: Results!
 

Sadly I don't have any video as my camera eats the contents of my memory card when I switch to video... however here are a few photos:

http://www.beyondmechanics.com/track/track.jpg

http://www.beyondmechanics.com/track/stage.jpg

http://www.beyondmechanics.com/track/fdsm.jpg

Still a DSM...
http://www.beyondmechanics.com/track/still-a-dsm.jpg

Gorgeous
http://www.beyondmechanics.com/track/s2k.jpg

The past and the future of drift
http://www.beyondmechanics.com/track...-the-torch.jpg

Ok, what the hell broke now
http://www.beyondmechanics.com/track/doh.jpg

Orly?
http://www.beyondmechanics.com/track/busted.jpg

Weighing the MX5
http://www.beyondmechanics.com/track/weight.jpg

Kiggly lighting it up
http://www.beyondmechanics.com/track/kiggly.jpg

Super clean NX2000 Turbo
http://www.beyondmechanics.com/track/clean.jpg

Some very sexy S/3's
http://www.beyondmechanics.com/track/3kgts.jpg

A custom Mid engine Prelude
http://www.beyondmechanics.com/track/lude.jpg

Crazy fab work
http://www.beyondmechanics.com/track/rude-lude.jpg

Is that an ITB 4-AGE I spy?
http://www.beyondmechanics.com/track/itbjpg.jpg

Driftoooooooooo!!1!111one1six
http://www.beyondmechanics.com/track/drift.jpg


MX5 in its natural habitat
http://www.beyondmechanics.com/track/mx5.jpg

Re: MAP Event @ BIR: Results!
 

Watching the competition in the stands was actually pretty fun. We got a video of you and Brad on that last run. I don't remember what you ran on that pass, but I thought it was an 11.1. It's on my g/f's camera, and I'll post up a link soon as she gets it off there (might take a couple days).

Re: MAP Event @ BIR: Results!
 

My timesheet from my best run. I'm on the right :)

Re: MAP Event @ BIR: Results!
 

Great pics! Brandon really showed that rear axle who the boss was. :) And the MN 3/S group only made an impact in the car show. (well except for MustGoFaster ripping it up in the drags)

later,
Curt

Re: MAP Event @ BIR: Results!
 

Looks like a good pass. The only thing I'm questioning is the 60', being nice to your clutch or were the tires not hooking up?

Re: MAP Event @ BIR: Results!
 

Any pictures of this beast? Engine etc? :drool:

Re: MAP Event @ BIR: Results!
 

There is definately room for improvement yet, for sure. I seem to cut really consistent 1.8's. If I could get that 60' down to the 1.6's, I "should" be a bit deeper into the 10's. I usually slip the clutch for a split second, then dump it. I am pretty sure I'm spinning the wheels a little bit out of the hole also. My rear camber is horrible and can't be helping either. I did try launching a bit harder on one pass, and yeah that cost me an axle. I'm real happy I got in the 10's, but I do admit there is still plenty of room for driver improvement.

Re: MAP Event @ BIR: Results!
 

My time slip. The scanner wouldn't pick them up, but my camera did ok.

http://www.mitsustyle.com/photopost/...m/PICT2160.JPG

Re: MAP Event @ BIR: Results!
 

That blue stealth was amazing, so jealous of it. That guy with the s2k didn't move like the whole time, he was chilling in the corner by the bathrooms, nice car though.

Re: MAP Event @ BIR: Results!
 

FYI, here is a link to the BIR photographers site. He has quite a few pics from the event.

https://www.imagequix.com/vando/3/

Re: MAP Event @ BIR: Results!
 

i was excited for BIR! I got down there and ended up running a 10.505 @ 137.15mph. I have the red/black 90 dsm! R/T .758, 60' 1.776, 330 4.679, 1/8 mile 6.945, 1/8 mile mph 108.24, 1000 8.877, 1/4 10.505, 1/4 mph 137.15

Re: MAP Event @ BIR: Results!
 

Write up! http://www.brainerdraceway.com/drag-...t-compact.html

Re: MAP Event @ BIR: Results!
 

Please contribute to this thread when you get a chance guys, thanks again!

MAP Proving Grounds Event @ BIR / Feedback and Discussion

Re: MAP Event @ BIR: Results!
 

Brandon, try a welded VC next time you have your tranny out, that might help a bit.

Re: MAP Event @ BIR: Results!
 

Need an ID number to view the link

Re: MAP Event @ BIR: Results!
 

Weird. OK well try just starting at

http://egleye.com/

That should let you get in there.

Re: MAP Event @ BIR: Results!
 

http://www.youtube.com/watch?v=Ix1aM5lyeuU
Here's Brandon Halon going 10.93 @ 137mph!

Re: MAP Event @ BIR: Results!
 

Nice!

Re: MAP Event @ BIR: Results!
 

Looks good man.

Re: MAP Event @ BIR: Results!
 

Sorry Bill!

http://www.youtube.com/watch?v=LINC20sHa3U

Re: MAP Event @ BIR: Results!
 

Nice thanks! You can kind of see when I cross the finish line a cloud of smoke starts forming behind me from popping the oil dipstick out and coating everything in oil.

Re: MAP Event @ BIR: Results!
 

No problem! and I see what your talkin about with the smoke!!

Better use zip ties! :)

Re: MAP Event @ BIR: Results!
 

or make a bracket like I did..looks a little more classy..lol

Re: MAP Event @ BIR: Results!
 

Pretty sure I'm going to use a hose clamp and a spring.

Re: MAP Event @ BIR: Results!
 

There ya go!