Re: Finally getting stuff done on our cars
 

I took out the dash and every wire that was on it, shaved about 40lbs. Next to go is the stock stearing wheel and install my Grant I have at home. Then I just need to finish running the few wires in the car to control everything. I am using switches and relays for everything. I still need to clean up the gauge holder and make the mounts but you get the idea.

http://pics.mypic.ca/a840856d.jpg

http://pics.mypic.ca/1673cd30.jpg

http://pics.mypic.ca/a43e4b2a.jpg

http://pics.mypic.ca/c0a5471f.jpg

~John

Re: Finally getting stuff done on our cars
 

10 bucks says that tach never sees 10. lol ;)

Re: Finally getting stuff done on our cars
 

I love how the boost gauge goes to 100psi. That's just crazy funny

Re: Finally getting stuff done on our cars
 

I plan to rev untill the motor stops making good power, and after I shift its back on power again(full boost). So I might or might not have to rev to or past 10k.

~John

Re: Finally getting stuff done on our cars
 

Just get it running for the dyno day, keep boost and power down until you get all the bugs worked out, then let'er buck! Wonder how much power that turbo will make at 20psi :D

Re: Finally getting stuff done on our cars
 

260ish?

-A. Swift

Re: Finally getting stuff done on our cars
 

He didn't ask what you made ;).

Re: Finally getting stuff done on our cars
 

lmao, PWNT.

Re: Finally getting stuff done on our cars
 

I have 23psi springs in my Tials, so I think 25ish will be my min boost. I plan on running atleast 35psi to start, power should be in the 6xx.x awhp range at that boost.

~John

Re: Finally getting stuff done on our cars
 

perhaps if the tune was half-way decent then it coulda made the power ass-fuck! :D

-A. Swift

Re: Finally getting stuff done on our cars
 

Or if the setup wasn't mis-matched? :rollinglaugh::Banane55:

Re: Finally getting stuff done on our cars
 

^ouch. Truf=teh suck for you.
I think your tuning costs just went up.

Re: Finally getting stuff done on our cars
 

WTF?

~John

Re: Finally getting stuff done on our cars
 

Requiring big brown to make sense is asking too much.

more pics! :D

Re: Finally getting stuff done on our cars
 

I will finish some more stuff tonight and post some more pics, what do you want to see?

~John

Re: Finally getting stuff done on our cars
 

That is not a wise bet! The old motor with a crappy 60 trim, was at some times launched at 8 or 9...I can't remember. All I know is I was sure the flywheel would be sawing thru my pants as soon as John let the clutch out.

Re: Finally getting stuff done on our cars
 

Video of the car idling :D

Re: Finally getting stuff done on our cars
 

I am sure you rember this also. "Watch the boost gauge, it should say 25."

~John

Re: Finally getting stuff done on our cars
 

WTF, where did you come from?

Re: Finally getting stuff done on our cars
 

He never left.

I didn't have any specific pics in mind, It just might be fun to look at it, how about a pic of whatever you are working on right now.

also, was it hard to get the dash out with the cage in there?