Re: Mark's 1G Winter Projects
Thanks for asking. Results:
First goal achieved - trap speed over 170 MPH. The car ran 170.88MPH @ 9.33, super bad 1.89 60 foot. I only got 4 passes in all weekend, 2 were aborted due to a poor launch in time trials and to me red lighting in the eliminations (Loosing). Also, I broke a vibrant IC clamp at the top of third gear, on what would have been my personal best pass to date. I ran 5.7 second 1/8 mile time! The best news is that the car went on the trailer running ready for the next event! I also figured out the anti lag so it is way better, the clutch is a new learning curve since I changed the engagement height. I learned a lot from my bad launches too. |
Re: Mark's 1G Winter Projects
Holy crap balls! 170!!
Congrats man! Any plans to hit that grudge race this Sunday at RFR? I'm going to spectate |
Re: Mark's 1G Winter Projects
Last weekend didnt go well. I lifted the head on the first pass...due to driver error. I bounced off of the rev limiter in 3rd while watching my boost gauge -fail.
A couple of videos from my archive, including my first 8 second pass. http://www.youtube.com/watch?v=oxxfxd6EpAA&hd=1 http://www.youtube.com/watch?v=qzPrGBjDANQ&hd=1 http://www.youtube.com/watch?v=H1Epgt7nGK8&hd=1 Next year will be better! |
Re: Mark's 1G Winter Projects
Good to see you as always Mark, sucks about the head lifting! Get that rev limiter raised now before you forget :)
|
Re: Mark's 1G Winter Projects
170! hot damn.
I like the "oh my god" in the first video. |
Re: Mark's 1G Winter Projects
I scored a set of new 15" volk te37's recently. Present to myself this year! Super lucky to find them new as they are discontinued. I found a dealer that had them in inventory in the US, it took lots of messages to dealers and searching. They are 10lbs per wheel!
http://i412.photobucket.com/albums/p...223_103155.jpg http://i412.photobucket.com/albums/p...222_165338.jpg I also made a change to a new 90mm throttle body, 3.5" ic piping' and hd vanjen clamps. http://i412.photobucket.com/albums/p...215_075146.jpg I'm excited for the race season! More updates to come. |
Re: Mark's 1G Winter Projects
Merry Christmas to you! That's so light and they look great. Your slicks still have lots of life?
|
Re: Mark's 1G Winter Projects
whoops double post.
|
Re: Mark's 1G Winter Projects
10 lbs is crazy, how wide are they?
3.5" piping is nuts too, do you think 3" is holding you back? I saw these new style clamps the other day too, they look promising! http://www.lpsfab.com/product/lps-alphaloc-coupler-3-0 https://www.youtube.com/watch?v=eszZTXb7ueI Edit: Looks like Kiggly plans on running the linked product in 3.5" next season. |
Re: Mark's 1G Winter Projects
Thank you for updating, those wheels are crazy light
|
Re: Mark's 1G Winter Projects
Wow, nice score! Had 17" TE37's on my car a while back, I think they were 15#'s though.
|
Re: Mark's 1G Winter Projects
So beautiful!
|
Re: Mark's 1G Winter Projects
Quote:
I don't know if it'll free up power or not. The reason I did it is the throttle body I'm using has a 3.5" vanjen input. I did a boost leak check yesterday and the system has never been sealed up this well. The clamps you listed look good too! The wheels are 8" wide. |
Re: Mark's 1G Winter Projects
Quote:
Quote:
Quote:
I can't be happier how the car has turned out, kind of a blend of show car and drag race machine! |
Re: Mark's 1G Winter Projects
Quote:
|
Re: Mark's 1G Winter Projects
So much drool in one thread, this is why youre my favorite DSM guy!
|
Re: Mark's 1G Winter Projects
In January I started a new project on the talon. Decided to make a tubular rear subframe for the 3000GT rear end. This way I can put that rear end in an ideal location. When I used the OEM subframe I could not get the rear end mounted high enough. I should be able to save approximately 25 pounds. I used a little bit thicker wall chromoly 0.120" for additional strength. I also wanted to use urethane bushings that I had for the factory subframe. I still need to make tabs for the lower control arms. I'm excited that this is all coming together.
http://i412.photobucket.com/albums/p...218_062837.jpg http://i412.photobucket.com/albums/p...215_160836.jpg http://i412.photobucket.com/albums/p...202_164738.jpg http://i412.photobucket.com/albums/p...202_185104.jpg http://i412.photobucket.com/albums/p...208_172923.jpg |
Re: Mark's 1G Winter Projects
Make another one?
Looks awesome! Seriously there would be a huge market for it. |
Re: Mark's 1G Winter Projects
Dude you are so rediculous. Your fabrication skills are amazing to say the least. What bender are you using?
|
Re: Mark's 1G Winter Projects
Can't wait to see it.
|
All times are GMT -5. The time now is 06:42 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.