MitsuStyle - Spyder in the making

Page 6 of 6

Show 40 post(s) from this thread on one page

MitsuStyle (http://www.mitsustyle.com/forums/index.php)

- Project Talk (http://www.mitsustyle.com/forums/forumdisplay.php?f=5)

- - Spyder in the making (http://www.mitsustyle.com/forums/showthread.php?t=25602)

turbotalon1g

08-31-2013 09:14 AM

Re: Spyder in the making

Quote:

Originally Posted by CornFed2.4 (Post 435365)

I just gave away 5 or so in the last month of oem ones. Lol.

Send that shit this way!

Quote:

Originally Posted by b00sted_spyder (Post 435366)

I've got tons of new oem parts into it from nuts, bolts, clips, plates, gaskets, etc. That's just how I roll. Lol.

That is gross.

b00sted_spyder

08-31-2013 04:06 PM

Re: Spyder in the making

This morning I went to go visit her. Plugged in coil pack. Primed up the engine. Tried starting it and couldn't get it started. Checked the plugs and #4 wasnt getting any fuel. The fic 1150 had some white residue on it. Im assuming from e85 sitting for a year and half. Swapped back in my 1680cc injectors. Dialed the 1680cc injectors on link and tried starting it. She starts for a few seconds and just dies. I captured a stream and looks like the injector duty just drops straight to 0 when it dies. Im assuming im having a fuel problem now?

turbotalon1g

08-31-2013 09:30 PM

Re: Spyder in the making

Sounds like it to me. how is your Fuel Pressure?

C3L1CA

08-31-2013 11:56 PM

Re: Spyder in the making

Engine bay looks good! I've never seen such a clean coil pack!

b00sted_spyder

09-01-2013 12:58 AM

Re: Spyder in the making

Quote:

Originally Posted by turbotalon1g (Post 435399)

Sounds like it to me. how is your Fuel Pressure?

Fuel pressure, I do not know. It still has the factory 2g regulator and should be at 43.5 psi. Is there a way to check for fuel pressure on the stock unit?

All times are GMT -5. The time now is 11:35 AM.

Page 6 of 6

Show 40 post(s) from this thread on one page