Re: joel's build
 

This cool a weather you shouldn't have any issues, I know a guy selling a dual water temp/oil psi gauge.....

Re: joel's build
 

I have a computer that should plug into your car that lets me look at your sensors and will tell me what your temp really is. Its obd2. I use it check engine code and air bag codes. It reads every engine sensor.

Re: joel's build
 

What FMIC are you running? Mine always ran hot. I ran around a 75/25 water to coolant mix with water wetter to try and help keep temps low. I switched to a less dense (ETS) FMIC which also helped.

Re: joel's build
 

I also have a scan tool that should work we could plug in and see what's going on

Re: joel's build
 

I have a punishment racing fmic. It's not a very thick core.

The weather never played a big part in it. Even in the winter. It has done it forever. it really sucks on the road coarse I have to lift and coast because it gets really warm when beating the shit out of it.

4seasons69, let me know when you could hook it up. My cel is on but I have a feeling it's because I deleted all the egr sensors.

Re: joel's build
 

Are you just tuned on the stock 99 ecu? If so and you have a laptop I'd pick up a tactrix cable so you can log and look at stuff. You can usually find them for sale used on evom or if you're cheap like me you can search nationally through craigslist and hopefully find a good deal from an honest guy who will ship.

Either way nice job on getting it going, hopefully makes some good numbers!

Re: joel's build
 

I have a Tactrix 2.0 floating around somewhere. I think Pat still has it.

Re: joel's build
 

I should be up there on Thursday evening to work on my car so we can on Thursday. My number is 651-983-1230 text me Thursday and remind me to bring it home from work with me.

Re: joel's build
 

I am going to look into the tractrix cable that would be really nice to be able to
do.

Also ill look like Brian Spilner.

Re: joel's build
 

Well turbo will be here sometime this week. I am excited to bolt it on and see what Shane can do with it on Monday.

Extended tip billet 20g wheel
tdo6h4 turbine with a machined hot side.
Hx 35 W/G

It should be able to pack some heat.
http://i85.photobucket.com/albums/k4...psdabae7a8.jpg

Re: joel's build
 

Re: joel's build
 

Nice, monday as in tomorrow?

Text me with some updates!

Re: joel's build
 

4seasons is getting his car tuned tomorrow. What you hoping to make?

Re: joel's build
 

No sorry Monday the 29th.

On DB's dyno I am hoping 370-400ish...
To be honest I have no clue what it is going to make. I have not seen any numbers out of this kind of turbo. Ill be happy with anything over 350.

Re: joel's build
 

Well turbo is installed and ready to go messed with the boost controller a little to see how it responded. I backed it way out thinking it would creep like crazy and it only made 10lbs. Turned it in a few turns an am making 17.

The boost seems to come on very gradually. I am running a very rich 10.5 afr so all seems well. Excited to strap it on the rollers and start cranking up the boost.

Re: joel's build
 

NIIIIICCCCCEEEE!!!!

Re: joel's build
 

No good today on the dyno. Couldn't make any more then 22lbs of boost on the dyno and was spooling as bas bad as a 6262. Waste gate was opening by itself even with tue wastegate unplugged.

Anyone have a torch? We could have a dsm bonfire!!!

I have two hx wastegates that I am doing to try. Hope it will work.

Re: joel's build
 

Hole in the wastegate actuator rubber? That sucks man, hope you get the issue resolved. How much power did it make on 22psi?

Re: joel's build
 

That sucks Joel, hopefully it's an easy fix!

Re: joel's build
 

299hp.

I have a holset wastegate I am going to use. I am going to drop the car back off at DB and just have them fab up a shaft and bracket. I am so tired of working on it.