MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Project Talk (http://www.mitsustyle.com/forums/forumdisplay.php?f=5)
-   -   Project Lex (http://www.mitsustyle.com/forums/showthread.php?t=28018)

niterydr 04-10-2017 01:58 PM

Re: Project Lex
 
Another recommendation would be to do a carbon test to see if you have exhaust in the coolant. This would indicate a head lifting under peak cylinder pressure (weak stud/headgasket combo or detonation typically the culprit).

Halon 04-10-2017 02:03 PM

Re: Project Lex
 
Not really sure how to do that. Either way, sounds like I have to get into boost to do that. So hopefully I'll have the wheels back end of the week all finished with new rooobers on. So hopefully can drive it this weekend and see what I see.

niterydr 04-10-2017 03:43 PM

Re: Project Lex
 
Quote:

Originally Posted by Halon (Post 463445)
Not really sure how to do that. Either way, sounds like I have to get into boost to do that. So hopefully I'll have the wheels back end of the week all finished with new rooobers on. So hopefully can drive it this weekend and see what I see.

Pretty simple.

http://www.oreillyauto.com/site/c/detail/LIS0/75500.oap

Halon 04-12-2017 04:36 PM

Re: Project Lex
 
3 Attachment(s)
Small updates.

I got the replacement ABS sensors installed. So just working on getting them wired to Infinity, slowly but surely. Also started wiring in the clutch pedal switch into Infinity as well.

While I'm really hoping 2017 is going to be a great year, I haven't lost focus of my 2018 plans either. So I got the motor loaded onto the trailer, and all the motor bits I bought from Real St., all loaded up as well. I'll be dropping this off with Daniel Koetz @ Precision Race Engine tomorrow to start doing his thing so it's ready in plenty of time for next Winter!

Manley Rods
Manley Pistons
Manley Valve Springs / Retainers
ARP Mains
ACL Race Bearings
Kelford -C VVTi cams
​​​​​​​Real St. Billet Tensioner

turbotalon1g 04-12-2017 07:54 PM

Re: Project Lex
 
Hellz yeah, he wouldn't answer my messages so that kinda sucks for me.

He was supposed to write me up a quote.

Halon 04-12-2017 08:08 PM

Re: Project Lex
 
1 Attachment(s)
That's too bad. I can ask him for ya when I see him tomorrow if u want.

Side note, Automotive Concepts sent me this teaser pic today. They are refinished, tires mounted and balanced, ready for pick up tomorrow!

turbotalon1g 04-12-2017 10:06 PM

Re: Project Lex
 
please do.

daaammmnnnn, looks good!

Halon 04-13-2017 08:54 PM

Re: Project Lex
 
2 Attachment(s)
Motor has been dropped off and is now under the good care of Mr. Koetz.

Got the wheels back today with the new meats on.l as well.

Speedfreak 04-13-2017 09:26 PM

Re: Project Lex
 
Finish looks good, and the meats look good as well

C3L1CA 04-14-2017 07:35 AM

Re: Project Lex
 
Looking good!

A//// Guy 04-14-2017 08:39 AM

Re: Project Lex
 
Clean and fresh!! Those rear tires look sweeeet. What kind are those on the front? They look like all seasons or snows haha.

Halon 04-14-2017 10:30 AM

Re: Project Lex
 
They are all-seasons. I got a really good deal on them (barely used). They are BFGoodrich G-Force Comp-2 tires. They actually have better ratings then the old Goodyear Eagles I had up front. So I think they will work just fine for me.

Kracka 04-14-2017 03:13 PM

Re: Project Lex
 
With that much acceleration, channeling the majority of your stopping power through all-seasons with be an interesting experience if you ever need to haul 'er down in short order :lol:

Halon 04-14-2017 03:20 PM

Re: Project Lex
 
They are better than what I had on the front before, which had no issue slowing down from 131mph at the track. It'll be fine, I actually did it mainly to give you all something to nit pick, looks like it worked!

A//// Guy 04-14-2017 03:42 PM

Re: Project Lex
 
Ahh ok. When you asked about it before you mentioned wanting summer only so they just didnt look like summer tires. Im sure they will be fine for some rips down the track.

Halon 04-25-2017 11:13 PM

Re: Project Lex
 
Gauge / Switch mount almost done.
http://www.dsmstyle.com/photopost/da...9_1024x576.jpg

My back started hurting just thinking about all this shit to install. This is what a large credit card bill looks like, and not an ounce of added HP.
-BC Coilovers
-Figs Rear LCA's
-FID 1600 injectors
-OEM Supra Front LCA's
-Moog Front UCA's
-Amsoil for trans & diff
-not shown but also on my credit card bill for last month are the reparied and refinished wheels and the tires, as well as a replacement front lip to replace my cracked one (new one is poly). Thanks tax return for helping me sneak this past the Mrs.
http://www.dsmstyle.com/photopost/da...9_1024x576.jpg

Megan vs. Figs
https://cimg8.ibsrv.net/gimg/www.clu...57e013e470.jpg

Figs RLCA's in and BC rear coilovers in. Fronts are next. Not looking forward to the back n forth game setting the coilovers height.
http://www.dsmstyle.com/photopost/da...6_1024x576.jpg


http://www.dsmstyle.com/photopost/da...2_1024x576.jpg

turbotalon1g 04-26-2017 07:12 AM

Re: Project Lex
 
peemp!
keep up dem ninja skills!

goodhart 04-26-2017 09:39 PM

Re: Project Lex
 
She should look pretty mice!

Kracka 04-27-2017 06:54 AM

Re: Project Lex
 
LOL @ credit card bill!

:lol:

Halon 05-17-2017 01:07 PM

Re: Project Lex
 
Since some people were asking for updated pics. Here's how it sits as of now on the new coilovers.

http://www.mitsustyle.com/photopost/...0_1024x768.JPG

http://www.mitsustyle.com/photopost/...9_1024x768.JPG

http://www.mitsustyle.com/photopost/...2_1024x768.JPG

http://www.mitsustyle.com/photopost/...7_1024x768.JPG


All times are GMT -5. The time now is 03:55 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.