Re: joel's build
 

Shitty man. FP has these. Maybe you can try one of them?

Re: joel's build
 

Might have to. Depending if they are going to charge a shit ton to make mine work.

Re: joel's build
 

I know how you feel!

Sorry to hear it didn't go to well! Just stick with it you'll get it figured out and working how you want

Re: joel's build
 

Who built the turbo? I'd be on the phone with them asap to figure out what the deal is.

Re: joel's build
 

Turbolab built it.

Re: joel's build
 

Its wasn't the turbo so I cant really blame them for it yet... the wastage they gave me didn't fit with my j pipe, and because I was in a time crunch I just put the one that was on my evo3. It was blowing the wastage open even with it unplugged. So need to get a stronger WG on and then it should be good. I hope.

Re: joel's build
 

Shitty.

Re: joel's build
 

BOOM!!!!! Went the transmission.... dam the just fell apart accelerating in 3rd.

Re: joel's build
 

What's the plan now anyways?

Re: joel's build
 

He's pulling it apart this weekend check to see if its actually built and fixing;).

The way he made it sound built trans just don't break like that, at least at his power level.

Re: joel's build
 

^X2

Re: joel's build
 

Reduild and fix it. Going to start pulling it apart tomorrow.

Re: joel's build
 

Dude! Sorry to hear about your trans. I also find it suspect that 4th went like it did. IIRC someone else had an issue with their TRE on here. Maybe they can chime in on their customer service side of things?

Re: joel's build
 

Jon is great to work with on resolving issues imo. Since you bought it used, you can't really expect him to warranty anything, but he should be able to identify if its one of his transmissions or not.

Re: joel's build
 

I think it is going to go to shep.

Re: joel's build
 

I choose Shep or Jack's if I had to, probably Jack's.

Re: joel's build
 

If this is a poll. I vote jack's.

Blackrosenova could probably get ya back up and have a solid trans to.

Buy jets and swap cases.

Re: joel's build
 

sorry to hear bad new man :/

Re: joel's build
 

Thanks for recommending me!

These transmissions are heartbreakers. Its sucks too because 3/4 tend to strip out at high loads and tend to take out other gears with them. You can shim the shafts tigher so the gears have a harder time seperating from each other under heavy load, but it will only help so much, plus more heat is generated with bearing tolerances set tighter.

Jon at Tre Transmissions is a good guy. You can tell he is knowledgable and passionate about his work, and is pretty sold on the idea of shotpeening gearsets.

Re: joel's build
 

Trans is out and will be shipped out to shep next week. Its going to be tight on making it to proving groumds. Dont think ill make it.