2009 Fall Dyno day- callouts and curiosities
 

I can't believe the fall dyno day is upon us already! For the first time possibly ever, I have not touched my setup with any last-minute parts! I'll be running my car as it came off the rollers at shane's in July. It put down ~385whp/340wtq on pump and ~420whp/390wtq on alky. The car is still running strong and I'm hoping to prove the 16-18% difference between the two dynos and break 480whp on map's dyno!

Enough about my damn evo though. I have a few call-outs for this event:
-asshanson (the grandpa-mobile)
-sleepyDSM
-floppy
-CVD
-goodhart
-95talonracer
-tehehodi
-poofy97gsx
-mlonker
-jrohner


You guys have had running project threads all summer, its time to put down some numbers on MAP's dyno!

Next up, anyone got any last-minute or recent changes? New setups or cars for a first-time on the dyno? Share what you can!

Re: 2009 Fall Dyno day- callouts and curiosities
 

no job = no money = no parts = no dyno....i wish though :(


thats my excuse

unless people want to donate :D

Re: 2009 Fall Dyno day- callouts and curiosities
 

If I have money for this event, I plan on dyno-ing. Weird though, as the car feels down on power. So, I wanna see if it REALLY is, or if I'm full of it, and the car just now feels "slow".

Re: 2009 Fall Dyno day- callouts and curiosities
 

If Im in town, you may see mad A4 power being put down in the 200s instead of 100s. :D

Re: 2009 Fall Dyno day- callouts and curiosities
 

Your butt dyno is busted. You may want to use Spaz's rubber fist to recalibrate it.

Re: 2009 Fall Dyno day- callouts and curiosities
 

Owned.

Re: 2009 Fall Dyno day- callouts and curiosities
 

Simple, yet elegant.

I plan on switching to e85 in the next couple days, I might be up a couple ponies.

Re: 2009 Fall Dyno day- callouts and curiosities
 

We'll see. I haven't made drastic changes from last year's 414hp/459torque. An Evo 8 ECU, Evo intake, SS o2 housing, and a few more PSI of boost on top end out of the puny 16G.

Re: 2009 Fall Dyno day- callouts and curiosities
 

I highly doubt Goodhart will have his up and running solid by then. And his tranny still sucks. Hopefully it will be soon though.

Re: 2009 Fall Dyno day- callouts and curiosities
 

Ya, no way I will have a DSM on the dyno. Waaaay to much to do, I want to do it right this time around, and then when I'm done I will still have a tranny that grinds in 2nd lol. My brother might be coming with if I can talk him into it and he should get the highest numbers of the day if he does.

Re: 2009 Fall Dyno day- callouts and curiosities
 

Who's your brother, and what does he have?

Re: 2009 Fall Dyno day- callouts and curiosities
 

Get that thing done already!

That's funny, there were two dudes with 1970's cameros that came last time that were damn sure they were gonna take top numbers...one made just over what my wife's car put down and the other made almost 300whp :D

Re: 2009 Fall Dyno day- callouts and curiosities
 

I'm curious to see if I can break the 200whp barrier with the 11b, It's going to make monster torque either way though I'm sure.

Re: 2009 Fall Dyno day- callouts and curiosities
 

Okay, what the hell. I doubt that I'll be tuned by then but nothing wrong with a baseline.

Re: 2009 Fall Dyno day- callouts and curiosities
 

I might have to make this event. The car is down for the moment, but if all goes well tomorrow I should be able to make it with a tweaked tune and a few more lbs from my baseline run at MAP...

Re: 2009 Fall Dyno day- callouts and curiosities
 

I will dyno for sure if I can find someone with the bluepoint snap on YA9140A tool for doing valve stem seals without taking the head off. Anyone? Right now it just smokes like a bitch under decel :( and I am not dynoing it like that.

Re: 2009 Fall Dyno day- callouts and curiosities
 

You could do the nylon rope in the cylinder trick, or compressed air. Air worked for me.

Re: 2009 Fall Dyno day- callouts and curiosities
 

Jim (TalonFiero) has one, I believe.

Re: 2009 Fall Dyno day- callouts and curiosities
 

Ill do the rope trick but how do I compress the valvespring? I need that tool. I wanna hit the dyno real bad! Ill be at 35psi or more if there is enough fuel pump on my 2.3. What estimate numbers anyone think that could put down? 6xx?

Re: 2009 Fall Dyno day- callouts and curiosities
 

You can rig something up. I once clamped two pieces of wood together with another thin one between them as a spacer, then leaned on it with my chest and pulled the keepers out, haha. Good thing they don't have a whole lot of seat pressure, anything over about 150lbs would be very hard to do this method. And I'm not sure about dsm heads, but if you can access the valve springs, you can rent a valve spring compressor from vato zone or Ho'reily's.

Re: 2009 Fall Dyno day- callouts and curiosities
 

Ya I almost need that tool because I have that dam perma torq HG and dont want to have to put a new one of those spendy ass things on just to replace the seals on the valves.

Re: 2009 Fall Dyno day- callouts and curiosities
 

onoez i dun been called out

Re: 2009 Fall Dyno day- callouts and curiosities
 

I'll be seeing what my new small 16g can do that I got from jhaan dude. I still gotta tune my car and then I'll be ready to go. Hoping for about 400whp. Last time I dyno'd my a/f was all messed up and my catch can line was kinked if anyone remember's that.. Smoked out DB pretty good! Haha

Re: 2009 Fall Dyno day- callouts and curiosities
 

I'd like to see what my scm6152 can put down if I can ever get the damn coupler I need to get her back on the road! hopefully it will be here monday!

Re: 2009 Fall Dyno day- callouts and curiosities
 

ill be dynoing my stock stealth non turbo hopin for 175 plus outta it all its got is a custom cat back. No 1st gear though kinda sux with a 6puck act clutch muhahaha

Re: 2009 Fall Dyno day- callouts and curiosities
 

Well perhaps I call you out scheides!

Re: 2009 Fall Dyno day- callouts and curiosities
 

I'd love to come see what the grandpa-mobile will put down, but I'll be in KC that weekend.

Re: 2009 Fall Dyno day- callouts and curiosities
 

I'm gonna call myself out, that way I can only disappoint myself.

Re: 2009 Fall Dyno day- callouts and curiosities
 

lol @ 300 whp.

He should double that very easily if not triple it, and a shit ton of torque.

He will either be doing this dyno day or the diesel one at HiTech that is on the same day.

Here is his rig:
http://www.youtube.com/watch?v=7EncjG64KNE


http://www.youtube.com/watch?v=7EncjG64KNE&hd=1

Re: 2009 Fall Dyno day- callouts and curiosities
 

Weak.

I'm already signed up ;)

Send it with a representative ;)

Re: 2009 Fall Dyno day- callouts and curiosities
 

I have met a local dodge truck guy that has put down around 1000whp.

Re: 2009 Fall Dyno day- callouts and curiosities
 

Is is Dewayne Davis from Princeton?

Re: 2009 Fall Dyno day- callouts and curiosities
 

Not sure on the name but it is a TT hennessey 1000 viper truck. Seen the guy a few times.

Re: 2009 Fall Dyno day- callouts and curiosities
 

lol @ viper truck. I want a viper boat.

Re: 2009 Fall Dyno day- callouts and curiosities
 

thanks for the call out but i'll be in cali. really wish i could make it cause i wanna see what it puts down. but its kinda a good thing i cant go, that way im not ashamed of my 200 whp lol

Re: 2009 Fall Dyno day- callouts and curiosities
 

Nope, this is a diesel truck

Re: 2009 Fall Dyno day- callouts and curiosities
 

I may show with my weak 16g car.

Re: 2009 Fall Dyno day- callouts and curiosities
 

That weak 16g car needs nawwzzzz man!

And you need a new sig also. How bout this one?
http://www.youtube.com/watch?v=Wq3zZ0BmkVI