1ga parts
 

We are in the process of tearing apart a 1ga shell that will eventually end up in the crusher. If you need 1ga parts, let me know and if its still there I'll get ya a price. The motor, tranny, i/c set up, and the seats and carpet will be taken, but if you need small stuff, call/text me at 651-468-6391, or pm me on here.

Car is a red 90 gsx 5 speed by the way.

Re: 1ga parts
 

Left/drivers rear caliper if it has a working emergency brake. Shipped 43334.
Thanks
Aaron

Re: 1ga parts
 

does that thing have a good 4 bolt rear end?

Re: 1ga parts
 

Is this the car with the strips you told me about?

I'm looking for the ones that go thru the center of the door. They don't have anything written on them.

Re: 1ga parts
 

I also could use the front turn signal sockets and about 6" of the wiring . Left and right.

Re: 1ga parts
 

E-brakes are shot.

It has a stock 3 bolt, seeing as its a 90.

Aaron, are you talking about the ones on the outside of the door. Pic would greatly help, Im most likely not using them.

Re: 1ga parts
 

Once everything is stripped, I can pull those for you.

Re: 1ga parts
 

If it has an intact E-Brake cable I'd take it. How are the interior plastics?

Re: 1ga parts
 

Im gonna be taking the ebrake cable, the plastics are in good shape, which ones do you need?

Re: 1ga parts
 

Will take some trades if you want a bunch of stuff, I could really use a fmic core!!

Re: 1ga parts
 

I will take them when you get it stripped. How are the front turn signal and the side lenses. How about the drivers/left side headlight motor.

Re: 1ga parts
 

Center of the door, I need both sides.

http://i225.photobucket.com/albums/d...i/S7300459.jpg

Re: 1ga parts
 

how fast are the wipers? if they go a normal fast pace i might want the wiper motor

Re: 1ga parts
 

I need the front clear lens assembly. I live close to you and can pick it up even. Possibly the light cover also for the passenger side

Re: 1ga parts
 

I need the clips that hold the rear wing onto the trunk lid!

Re: 1ga parts
 

Im guessing they work just fine, I havent seen them in action. I can test them, and shoot ya a text.

Send me a text, make an offer on them.

If my friend isn't using the spoiler, then I'll pm you.

Re: 1ga parts
 

Yep have those, they're yours free if you come by and pull them. I don't wanna risk messing them up haha.

Re: 1ga parts
 

^sweet will do, thx man

Re: 1ga parts
 

dan, can I have the stock downpipe to hack up?

Re: 1ga parts
 

It's a 3inch downpipe, with no flange to hook up a catback. Owner did some "custom" exhaust work.

Re: 1ga parts
 

BUMP, sorry for being slow with this, been busy pulling the motor and what not. Ill get a full list of what has been spoken for up later today, or tomorrow.
I need-
a n/t throttle body
a fmic core (short route style would be key)
1g headliner (mine has a sunroof, but can always mod one to fit)
a tubular 02 housing
external wastegate (cheap one would do the trick)
and will take some trades, depending on what you need.

things i know are gone-
motor
trans
tcase
seats, carpet, pillars, hatch cover, shift knob
gas tank
wiper motors
headlight corners
couple other things i cant think of, like i said, ill get a complete list up later of whats gone/spoken for.

Thanks,
Dan.

Re: 1ga parts
 

Bump for the car heading to the crusher here soon, maybe tomorrow.

EDIT: text me with what you want, and I will let you know if its available. A lot of parts that were "spoken for" were never taken out, so there is still some good stuff left. # is in the O.P.

Re: 1ga parts
 

I know super bleeder still needs them clips for the spoiler

Re: 1ga parts
 

Yea the spoiler is gone, going on my friends laser.

Re: 1ga parts
 

do you have the ecm/ecm

Re: 1ga parts
 

An ECU? Yes there is non-eprom ecu in the car.

Re: 1ga parts
 

i need the upper dash connection trim, the thing that covers the screws in the dash.
here it is
http://cgi.ebay.com/ebaymotors/1g-DS...Q5fAccessories