MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   The Parking Lot - On & Off Topic (http://www.mitsustyle.com/forums/forumdisplay.php?f=21)
-   -   Show us your floor jack (http://www.mitsustyle.com/forums/showthread.php?t=29289)

b00sted_spyder 03-28-2011 02:18 PM

Show us your floor jack
 
Just wanted to see what you guys are using. Post a picture. Do you like it? How much was it? What is it made out of?

I'll start. I just received my OTC 1532 aluminum floor jack from Amazon for $250 shipped. So far I love it. It's 10x lighter than my old POS faded Craftsman and it's super easy to maneuver.
http://i4.photobucket.com/albums/y14...g?t=1301336024

tpunx99GSX 03-28-2011 02:20 PM

Re: Show us your floor jack
 
That looks like the one that i had that i will never buy again. I had the car up on it so i could quick slide under there and grab a socket that dropped and right when i was under it, the piston sprung a leak and dropped the car on me. lucky the car wasnt lowered and my friend had another jack handy.
Mine was the blue aluminum jack from pep boys though, so maybe not the same one.
We replaced it with the same one, and it did the same exact thing, this time no one was under the car.

Febo 03-28-2011 02:23 PM

Re: Show us your floor jack
 
http://image.fourwheeler.com/f/edito...uck-norris.jpg

b00sted_spyder 03-28-2011 02:31 PM

Re: Show us your floor jack
 
Quote:

Originally Posted by tpunx99GSX (Post 378346)
That looks like the one that i had that i will never buy again. I had the car up on it so i could quick slide under there and grab a socket that dropped and right when i was under it, the piston sprung a leak and dropped the car on me. lucky the car wasnt lowered and my friend had another jack handy.
Mine was the blue aluminum jack from pep boys though, so maybe not the same one.
We replaced it with the same one, and it did the same exact thing, this time no one was under the car.

How much was the floor jack at Pepboys? Was it an OTC brand? I've read so many good reviews on this floor jack that's why I purchased it.

tpunx99GSX 03-28-2011 02:32 PM

Re: Show us your floor jack
 
Im not sure the brand name as it has been a while since i bought it. I would just make sure its not the same one that pep boys carries.

asshanson 03-28-2011 02:44 PM

Re: Show us your floor jack
 
I recently got an Arcan XL35, it's pretty nice I guess, at least a lot better than my old cheap craftsman one. Low profile plus great range at 3.5 to 21.375 inches, dual pumps, overall good quality for just $100 on clearance at northern. It does weigh 100 lbs though.

Near the bottom of the page: http://www.arcanusa.com/lifting.html
http://www.arcanusa.com/Images/Lifting/PPXL35.jpg

Kracka 03-28-2011 02:49 PM

Re: Show us your floor jack
 
Blue & silver aluminum one from Harbor Freight...so far I love it, best one I've owned yet.

Halon 03-28-2011 03:00 PM

Re: Show us your floor jack
 
Low Profile aluminum craftsman (sliver/red). It's light weight and low profile which I like. The jacking capabilities on the otherhand, meh... I can tell that it doesn't jack like it used to, not sure if there's a leak or what. I'll keep using it until it dies.

A//// Guy 03-28-2011 03:00 PM

Re: Show us your floor jack
 
Tom you shouldnt be going under the car ever with just the floor jack underneath.. Put some normal jacks down FFS. durr.

Ive only used my dads epicly old floor jack, raises much further than any of the new ones, and its like 150 lbs.

b00sted_spyder 03-28-2011 03:07 PM

Re: Show us your floor jack
 
The OTC 1532 floor jack takes 5 full pumps to reach the maximum height and it only weighs around 40 pounds.

turbotalon1g 03-28-2011 04:21 PM

Re: Show us your floor jack
 
Quote:

Originally Posted by Kracka (Post 378355)
Blue & silver aluminum one from Harbor Freight...so far I love it, best one I've owned yet.

x2 was $60

tpunx99GSX 03-28-2011 04:28 PM

Re: Show us your floor jack
 
Quote:

Originally Posted by A//// Guy (Post 378357)
Tom you shouldnt be going under the car ever with just the floor jack underneath.. Put some normal jacks down FFS. durr.

Ive only used my dads epicly old floor jack, raises much further than any of the new ones, and its like 150 lbs.

Yeah i know that. I was just grabbing a socket that i dropped and was only under there for a second (which is no excuse). It was funny, when the car slammed down on me, i sat there for a second as the oil pan was pressing up against my face thinking, "can i wiggle my toes. can i move my fingers" my buddy who was standing next to the car when it happened didnt say a word thinking i was dead.. he bends over to look and was the palest black guy i had ever saw... he says "uhm are you dead" of which i reply "well no but can you get the car off of me." hahaha.

goodhart 03-28-2011 04:40 PM

Re: Show us your floor jack
 
Quote:

Originally Posted by Kracka (Post 378355)
Blue & silver aluminum one from Harbor Freight...so far I love it, best one I've owned yet.

Quote:

Originally Posted by turbotalon1g (Post 378362)
x2 was $60

Chang was telling me about this one cause he has one too. Did you guys use a coupon to get it that cheap or is it just not on their website? Cause it isn't on there now. :( best deal on their site for a low profile jack is an orange one for $80.

Halon 03-28-2011 06:13 PM

Re: Show us your floor jack
 
Quote:

Originally Posted by b00sted_spyder (Post 378359)
The OTC 1532 floor jack takes 5 full pumps to reach the maximum height and it only weighs around 40 pounds.

Does it pump that fast when it has a load on it though? My Craftsman one will go to full height in like 2 pumps with no load on it. But soon as it gets a load on it, it pumps normally (by design).

enasnitsi 03-28-2011 06:42 PM

Re: Show us your floor jack
 
I had a blue and silver aluminum floor jack like but it was made by clarke. It didn't last long though. The threads stripped out of the valve to be able to jack it up. I paid 149 for it and it didn't last a month. Its under warranty but have to send it to Europe to get it covered.

s1ngletracker 03-28-2011 07:25 PM

Re: Show us your floor jack
 
I just got that orange one from HF for $80. It is lower profile, and goes higher than the nicest aluminum one they have, which is $130 on sale right now. It isn't a rapid pump,and is a bit heavy, but it is super solid and I dont mind hefting it on and off the trailer. Finally able to get the chumpcar from ride height (uber low, little clearance with garden edging lip) to a very workable height without having to reposition on stands and add blocks on the jack to get it high enough.

goodhart 03-28-2011 07:40 PM

Re: Show us your floor jack
 
Quote:

Originally Posted by s1ngletracker (Post 378376)
I just got that orange one from HF for $80. It is lower profile, and goes higher than the nicest aluminum one they have, which is $130 on sale right now. It isn't a rapid pump,and is a bit heavy, but it is super solid and I dont mind hefting it on and off the trailer. Finally able to get the chumpcar from ride height (uber low, little clearance with garden edging lip) to a very workable height without having to reposition on stands and add blocks on the jack to get it high enough.


Nice, maybe I'll look into that one.

cmspaz 03-28-2011 10:56 PM

Re: Show us your floor jack
 
Blue and silver aluminum AC Delco jack, had it for two years now, has never let me down.

CornFed2.4 03-28-2011 11:08 PM

Re: Show us your floor jack
 
No one said tool shop yet! I got one from my rent's like 4 years ago and it works (. )( .)'s

mdost03 03-29-2011 12:43 AM

Re: Show us your floor jack
 
I got this jack, been working great for a couple years now:

http://www.sears.com/shc/s/p_10153_1...&blockType=G11

s1ngletracker 03-29-2011 10:56 AM

Re: Show us your floor jack
 
Quote:

Originally Posted by goodhart (Post 378379)
Nice, maybe I'll look into that one.

Just went on sale for $59.99. Beat that.

twack 04-05-2011 01:55 AM

Re: Show us your floor jack
 
Ive used this 'tools shop' brand floor jack for the past 5 or 6 years. it works great and ive never had a problem with it and ive used it almost daily since i got it.

http://i73.photobucket.com/albums/i2...t/04042148.jpg

rose0529 04-06-2011 08:40 AM

Re: Show us your floor jack
 
Picked up this jack last night. I think its the same asshansons. But I got it at costco for $95. Its a heavy beast, but stays on the ground so thats not a big deal. Does a great job. So far I'm very happy with it.

http://farm6.static.flickr.com/5030/...1dc954e6_b.jpg

http://farm6.static.flickr.com/5309/...73a4332f_b.jpg

Tired to see if i could get full extension, but the front bumper hit the ground first, haha.

http://farm6.static.flickr.com/5302/...f91d4ebb_b.jpg

LingLing 04-06-2011 08:47 AM

Re: Show us your floor jack
 
^^^How far off the ground is the rear at that point?

asshanson 04-06-2011 10:56 AM

Re: Show us your floor jack
 
Nice buy Rosey! Yes, it's basically the same one I have, that is a great price.

DoughtCom 04-07-2011 12:35 AM

Re: Show us your floor jack
 
http://t1.gstatic.com/images?q=tbn:A...0iPQshJ8F_6x2Q

Just kidding... I have a low profile jack form Harbor Freight and it's tits.

backwoods 04-07-2011 12:47 AM

Re: Show us your floor jack
 
rose, your blocks are behind the front tires not preventing that evo to fall on its face lol

rose0529 04-07-2011 07:53 AM

Re: Show us your floor jack
 
^ my driveway is sloped, and i didnt want to take a chance it would roll away just in case!


All times are GMT -5. The time now is 01:39 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.