FS Ball Bearing 50 trims, dsm bolt-on
For sale:
Quantity: 2 50-5051RE turbochargers. Otherwise known as the SCM50 ball bearing turbochargers. Rated for 450+hp each. These are E cover 50 trims with the upgraded heavy duty actuators. Good for 36psi of boost out of these turbo's. They also hold 18psi perfectly if requested. They feature the td05 bolt-on flange with the cut housing to help promote against boost creep. These turbo's have been inspected are in 100% working order. 8000 miles on them approximently. These turbo's retail for $1299+ each, plus wastegates. I would like to dump them off as they need to go to make way for other items. $700 each. $1300 for the pair. |
Re: FS Ball Bearing 50 trims, dsm bolt-on
Dont you mean 36psi if they are attached to a 1.5L motor
|
Re: FS Ball Bearing 50 trims, dsm bolt-on
Quote:
|
Re: FS Ball Bearing 50 trims, dsm bolt-on
I'm assuming these are internally gated?
|
Re: FS Ball Bearing 50 trims, dsm bolt-on
Yes they are with the heavy duty wastegate actuators and a cut divider housing.
|
Re: FS Ball Bearing 50 trims, dsm bolt-on
Up up up..no offers?
|
Re: FS Ball Bearing 50 trims, dsm bolt-on
500.00
|
Re: FS Ball Bearing 50 trims, dsm bolt-on
Quote:
|
Re: FS Ball Bearing 50 trims, dsm bolt-on
swanny, put them on nabr or some other national board where the people actually have money!
|
Re: FS Ball Bearing 50 trims, dsm bolt-on
Quote:
|
Re: FS Ball Bearing 50 trims, dsm bolt-on
I'd be all over one of these if it was externally gated.
|
Re: FS Ball Bearing 50 trims, dsm bolt-on
That probably wouldnt be a huge deal to accomplish.
|
Re: FS Ball Bearing 50 trims, dsm bolt-on
Quote:
It can be converted easily if need be. |
Re: FS Ball Bearing 50 trims, dsm bolt-on
very easy to do both of the 61's were cut and internal to start with
|
Re: FS Ball Bearing 50 trims, dsm bolt-on
I'm curious how one of these runs on a stroker if you wanna donate swanny :lol:
|
Re: FS Ball Bearing 50 trims, dsm bolt-on
No longer for sale, thanks for the interest.
|
All times are GMT -5. The time now is 09:56 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.