MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Powder Keg Coatings (http://www.mitsustyle.com/forums/forumdisplay.php?f=94)
-   -   Pictures of our powder coating work! (http://www.mitsustyle.com/forums/showthread.php?t=30962)

PowderKeg 01-12-2012 07:05 PM

Pictures of our powder coating work!
 
Powder Coating
FAQs
Available Colors
Our Gallery
Pricing
Request a Quote
Click here to send us a private message!

All of our powder coating services include basic prep work including chemical stripping, media blasting or washing as needed and all thread plugging & taping off of any areas you don’t want coated.

We DO NOT disassemble parts. It is your responsibility to disassemble your parts down to the point where it would be ready to go in the oven.

Available Colors:
We make every effort to have as much variety of colors in stock as possible but due to the huge range of colors and different gloss levels it is impossible for us to have everything. There is a $15 charge to special order a standard color and $25 for a specialty color we do not have in stock. All candy & some metallic colors are two stage powders.

There are over 6,500 total colors available to choose from!

Our current in stock colors include:

Single Stage:
+ Wrinkle Black
+ Gloss Black
+ Solar Flat Black
+ Satin Black
+ Stone Black
+ US Blue
+ Sky White
+ Smoke Gray
+ Light Gray
+ Crystal Gray
+ Kingsport Grey
+ Stone Bronze
+ Misty Lava
+ Super Mirror Blue
+ Purple Wave
+ Ruby Red
+ Dolly Pink
+ Forest Green
+ Light Gray
+ Sunny Yellow
+ Blasted Nickel (Limited Quantity)
+ Red Wrinkle
+ Midnight Blue Wrinkle (Limited Quantity)
+ Tiffany Blue (Limited Quantity)
+ Zesty Teal (Limited Quantity)
+ Orange Soda (Limited Quantity)

Two Stage/Specialty:
+ Yellow Texture (Limited Quantity)
+ Neon Pink (Limited Quantity)
+ Candy Red
+ Candy Blue
+ Black Chrome
+ Mercedes Silver
+ Metallic Gold

PowderKeg 01-12-2012 07:08 PM

Re: Powder Coating: Info, Colors & FAQs
 
Some colors on display in our showroom:
http://www.powderkegcoatings.com/wp-...rs/rubyred.jpg
http://www.powderkegcoatings.com/wp-...s/skywhite.jpg
http://www.powderkegcoatings.com/wp-...ors/blacks.jpg
http://www.powderkegcoatings.com/wp-...mirrorblue.jpg
http://www.powderkegcoatings.com/wp-...purplewave.jpg
http://www.powderkegcoatings.com/wp-.../smokegray.jpg
http://www.powderkegcoatings.com/wp-...wrinklered.jpg
http://www.powderkegcoatings.com/wp-...stednickel.jpg
http://www.powderkegcoatings.com/wp-...ors/chrome.jpg

And here are some pictures of some work we have previously done:
http://www.powderkegcoatings.com/wp-...allicgold5.jpg
http://www.powderkegcoatings.com/wp-.../candyred2.jpg
http://www.powderkegcoatings.com/wp-.../neonpink3.jpg
http://www.powderkegcoatings.com/wp-...c/skywhite.jpg
http://www.powderkegcoatings.com/wp-...c/wrinkle6.jpg
http://www.powderkegcoatings.com/wp-.../slategrey.jpg
http://www.powderkegcoatings.com/wp-...inkleblack.jpg
http://www.powderkegcoatings.com/wp-.../wrinklevc.jpg

PowderKeg 01-18-2012 09:09 PM

Re: Powder Coating: Info, Colors & FAQs
 
Before:
http://www.powderkegcoatings.com/wp-.../pc/before.jpg
After:
http://www.powderkegcoatings.com/wp-...alvecovers.jpg

PowderKeg 01-23-2012 05:24 PM

Re: Pictures of our powder coating work!
 
Gloss Black Acura TL Wheels!
http://www.powderkegcoatings.com/wp-...lackwheels.jpg

Alpha D 01-23-2012 08:56 PM

Re: Pictures of our powder coating work!
 
Wow you guys sure are good at painting/Coating Looking forward to getting a set of wheels to you once salt seasons over.

PowderKeg 01-26-2012 11:38 AM

Re: Pictures of our powder coating work!
 
Quote:

Originally Posted by Alpha D (Post 398822)
Wow you guys sure are good at painting/Coating Looking forward to getting a set of wheels to you once salt seasons over.

Thank you, let me know whenever you're ready!

Here's a valve cover we just finished up in Aztec Gold
http://www.powderkegcoatings.com/wp-...reandafter.jpg

PowderKeg 01-27-2012 05:27 PM

Re: Pictures of our powder coating work!
 
Here are some brackets and bolts we finished up in Mirror Silver!
http://www.powderkegcoatings.com/wp-...rrorsilver.jpg

PowderKeg 01-30-2012 12:11 PM

Re: Pictures of our powder coating work!
 
Solar Flat Black Audi Wheels:
http://www.powderkegcoatings.com/wp-.../flatblack.jpg
http://www.powderkegcoatings.com/wp-...olarblack2.jpg

PowderKeg 01-30-2012 08:38 PM

Re: Pictures of our powder coating work!
 
Sky White Roll Bar
http://www.powderkegcoatings.com/wp-...terollcage.jpg
http://www.powderkegcoatings.com/wp-...terollbar2.jpg

PowderKeg 02-01-2012 12:12 PM

Re: Pictures of our powder coating work!
 
Some Wrinkle Black Parts!
http://www.powderkegcoatings.com/wp-...blackparts.jpg
http://www.powderkegcoatings.com/wp-...lackparts2.jpg

PowderKeg 02-01-2012 05:55 PM

Re: Pictures of our powder coating work!
 
Forest Green
http://www.powderkegcoatings.com/wp-...orestgreen.jpg

Sunny Yellow
http://www.powderkegcoatings.com/wp-...unnyyellow.jpg

PowderKeg 02-02-2012 11:28 AM

Re: Pictures of our powder coating work!
 
Candy Blue
http://www.powderkegcoatings.com/wp-...candyblue1.jpg

munchgsx 02-02-2012 09:11 PM

Re: Pictures of our powder coating work!
 
Do you sand blast the valve covers first?

PowderKeg 02-02-2012 09:49 PM

Re: Pictures of our powder coating work!
 
Quote:

Originally Posted by munchgsx (Post 399428)
Do you sand blast the valve covers first?

We do offer blasting on valve covers and we also offer just chemical stripping or hand sanding as well.

PowderKeg 02-09-2012 11:40 AM

Re: Pictures of our powder coating work!
 
Here is our Stone Bronze! You really have to see this color in person to appreciate this awesome finish.
http://www.powderkegcoatings.com/wp-...tonebronze.jpg

Kracka 02-09-2012 12:02 PM

Re: Pictures of our powder coating work!
 
Do you guys do high-temp exhaust ceramic coating?

PowderKeg 02-09-2012 03:45 PM

Re: Pictures of our powder coating work!
 
Not yet, we were hoping to have ceramic up and running but right now we're just focusing on powder coating.

89_Colt_GT 02-09-2012 03:57 PM

Re: Pictures of our powder coating work!
 
If a wheel has gouges in it, what is the best consumer product to fill these in before powdercoating?

Kracka 02-09-2012 04:01 PM

Re: Pictures of our powder coating work!
 
I wouldn't recommend anything short of professional wheel repair for a damaged wheel. Too much is riding on the integrity of a wheel, literally. I bent/flatened a stock X wheel and it was only $125 to repair and refinish.

PowderKeg 02-11-2012 01:06 PM

Re: Pictures of our powder coating work!
 
It's a busy wheel day!
https://fbcdn-sphotos-a.akamaihd.net...42040750_n.jpg


All times are GMT -5. The time now is 08:30 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.