DSMLink Tuning guide...
I was looking to get a good street tune to tide me over until i get my FMIC pipes so i can install the 50 trim, 680s, FMIC, Forge MBC etc...
Currently i have the following on my 95 GST Small 16g 450cc injectors MBC DSMLINK 3S Fuel Pump Fidenza Flywheel RRE Built 6Bolt with 2g pistons RRE Stage 2 Ported 2g Head Stock SMIC 3" Turbo Back exhaust ACT 2100 Clutch Intake pipe RRE UICP Greddy Type S Bov mad tyte 2g GSX rims painted black (lol) Basically what i was wondering is if this would be a good tuning guide to go by when doing a street tune. http://www.dsmtuners.com/forums/show...hlight=dsmlink and a question, with the mods stated above what do you think would be a good boost to start at? Thanks for the help Tom |
Re: DSMLink Tuning guide...
you don't have a way to control fuel pressure or a wb02 to see what you're actually doing. so i'd say just click the link over to stock injectors and let er buck.
|
Re: DSMLink Tuning guide...
yeah that would be fine and dandy but im seeing knock when im only running 10 psi. everything is at 0s across the board.
|
Re: DSMLink Tuning guide...
does your knock sensor still have the insulating goo in it?
check your base timing? correct spark plugs? |
Re: DSMLink Tuning guide...
My friend has basically the same mods as you(minus the 2g pistons, DSMlink, intake pipe, and 2g SMIC) on his 1g and he is at 15 psi with no knock. I know its not on dsmlink but with his SAFC and datalogger, he has not too much more fuel(maybe like 10% at 7000). What is your timing like? Why not add some more fuel? then if its still knocking look at your timing(fucking 2gs).
-Colin |
Re: DSMLink Tuning guide...
Quote:
If im understanding you timing question correctly, currently the dsmlink is set at 0 across the board for timing adjustment. Havent checked the spark plugs, but will when i get home from work tonight and put in the NGK Bpr6's if they are not. Quote:
Now heres the thing, i havent done a good solid 3rd gear pull, i couldnt find a good place to make a pull without being harassed by da po-po. But i found a place last weekend that im going to do some pulls later at. Im usually pulling 2.3-4 degress of knock in the 4k+ rpms. Ill attach one of the logs. I also dont think this was set up on my laptop correct to capture the correct values. I.E its not captureing the Throttle pos. ill attach it in a bit aj really needs to allow .dat files to be attached. |
Re: DSMLink Tuning guide...
it SHOULD have insulating goo. the goo acts as a dampner and if its gone the knock sensor gets really really finicky.
by timing i mean check your true base timing. as in, with a timing light, on the crank pulley. when you mess around with timing on the dsmlink it assumes you have the stock timing dead-on-the-nuts, or wherever else you want to set it if you decide to in the future. |
Re: DSMLink Tuning guide...
I can check both of those when i get home, luckly yesterday i found out that my buddy has a timing light.
|
Re: DSMLink Tuning guide...
1 Attachment(s)
Attached is the log file, please look and help anyway you can, im scared of all the damn knock im getting the run is towards the end. its a 3rd gear pull from around 2000 rpm
|
Re: DSMLink Tuning guide...
Even though your o2 voltage doesn't show it, I think you need more fuel since you are on stock injectors with your fuel adjustment at 0% across the board.
|
Re: DSMLink Tuning guide...
680s and new spark plugs are going on tomorrow. I was already planning on putting the 680s on but i didnt realise i was getting so much knock with the 450s. so its time
|
Re: DSMLink Tuning guide...
Probably a good idea since you were at 99% DC with the 450's.
|
Re: DSMLink Tuning guide...
Quote:
|
Re: DSMLink Tuning guide...
what in the hell? 99% IDC? thats nuts, my friend is at like maybe 92% what so damn different? Does a 255 and a rewire help that much?
-Colin |
Re: DSMLink Tuning guide...
Yeah i dunno whats going on just that it needs to change soon.
|
Re: DSMLink Tuning guide...
Quote:
My knock sensor on my block(out of the car) has no insulation around it. |
Re: DSMLink Tuning guide...
Quote:
|
Re: DSMLink Tuning guide...
You should be able to run the 450's & the small 16g no problem. On my old GST, I ran the same exact thing.
|
Re: DSMLink Tuning guide...
This equals hilarious so old. what ever happend to tom is he still in the DSM game? Bump from the past
|
Re: DSMLink Tuning guide...
You'll find him regularly in the politics section. :D
|
All times are GMT -5. The time now is 12:02 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.