FS Tons of mitsu parts
Here is all that I have that I am trying to get rid of. All is Best Offer so send me a PM of what you need and an offer on it.
timing belt pullys (500 miles) intrepid coil with pig tail manual tranny clutch fork boot tinted narrow band air fuel gauge Coil on plug COP setup 4 AN 180 degree hose end 6 AN 45 degree end stainless braided turbo oil feed line with fittings from head 1/8 NPT fuel line from filter to rail (stock) starter 3 ss AN line with one end 20" long All valve cover bolts plug wire covers (Mitsubishi and stripe) turbo coolant hard lines b&m fuel pressure gauge (comes with adapter to mount on fuel filter) harmonic balancer stock oil fill cap 2" 90 degree pipe Stainless balance shaft tensioner pulley deltagate mark 2 wastegate (needs seal) 91.5 up center differential stock timing belt (100 miles) 1g light grey leather seats front back and matching door panels 1g 90 to 91 center differential stock 1g 90 to 91 center differential 4 spyder 1g transistor box 91 up 1g front AUTO AWD axles 1g stock wheels 1g throttle position sensors TPS 1g radiator hoses 1g front seal cover 1ga pass headlight seal 1g thermostat housing 1g dip stick and tube 1g fuel rail with regulator 1g upper coolant pipe 1g injector resistor box 1g 91 and up shifter assembly 1ga driver side running light 1g bov recirculation tube 1g front rotors brand new 1g balance shaft sprocket, spacer, and pulley 1g lower timing sprocket 1g front and rear upper metal timing belt covers 1g passenger motor mount 1g driver side running light 1g gauge cluster 112K 1ga brand new headlight bulbs 1g passenger dark grey visor 1g driver power mirror black 1ga silver pop up headlight assembly 1g talon behind driver door molding silver 1ga passenger headlight motor 1g rear motor mount 1g gauge cluster trim 1ga passenger headlight trim 1ga driver upper headlight trim 1g cams 1g thermostat housing 1g intake manifold 91 automatic transfer case 1g coil pack 1g driver passenger floor mats dark grey 1g SMIC intercooler 1g grey door driver panels 1g passenger door panel 1g under steering wheel grey foam trim (by knees) 1g talon passenger tail light 1g driver pasenger B pillar plastics 1g carpet chenter consol kick panels 1g driver under door side molding 1g driver passenger A pillers 2g fuel rail 2g driver motor mount 2g throttle body 2g FWD rear wheel bearings 2g 97 Gst ecu 2g fuel pressure regulator FPR and b&m adjustable regulator 2g front seal cover 2g FWD front brake pads (500 miles) 2gb foglights 2g gauge cluster trim (stock) 2g gauge cluster trim (dual gauges) 2g blinker assembly 2g stock fuel pumps 2g stock intinity amp 2g FWD fuel sending unit 2g head 2g AWD front axle passenger 2g throttle body 95 96 manual transfer cases 2g shifter assembly 2g non LSD rear end complete with cradle wheel bearings and all 2g non LSD rear axles 2g built FWD TRE tranny 2g 95 96 awd manual tranny 2g radiator 2g intake manifold (one with MAP sensor) 2g steering wheel dark grey 2g talon passenger tail light 2g passenger white door 2g rear speaker plastic black 2gb front bumper 2g black dash 2g passenger floor mat (eclipse) 2g FWD driver axle 5ft 2g mas extension wire 2g grey front cloth seats 2g mas air flow sensor 2g driver front splash guard 2g SMIC shroud 2g driver inner splash guard |
Re: FS Tons of mitsu parts
I am interested in the Fuel Pressure gauge & adapter.
How much? I'm up in Ramsey and could meet up with you. |
Re: FS Tons of mitsu parts
PMd about axles and fuel line.
|
Re: FS Tons of mitsu parts
how much do you want for the 2.5" TB elbo and the air fuel gauge
|
Re: FS Tons of mitsu parts
Is the 2G radiator oem or aftermarket?
|
Re: FS Tons of mitsu parts
Do you have a better pic of the 1g wheels? What kind of condition are they in? How many?
|
Re: FS Tons of mitsu parts
I would like to buy the front bumper cover for sure.
i might be interested in the ecu, transfer case, stock fuel pumps, 2g head and 2g intake and some other parts. When could i come by to take a look? |
Re: FS Tons of mitsu parts
The wheels (2) are ok but need cleaning.
Quote:
|
Re: FS Tons of mitsu parts
how much for both starters, 1g dipstick, and the custom short mitsubishi coolant reservoir with sensor (good for short rout intercooler piping).....thanks!!!
|
Re: FS Tons of mitsu parts
Interested in 1g stock gst rims (2) of them for $20 with no tires please...oh yea they aren't bent or have the outer bead lip bent inward..right?? PM where to meet up. thank you
|
Re: FS Tons of mitsu parts
Quote:
|
Re: FS Tons of mitsu parts
Do you happen to have the rest of the panels for the black dash?
Like Air bag, glove box, all the other small black panels that go underneath? |
Re: FS Tons of mitsu parts
kerry pm with what you want for this stuff
1ga driver side running light 1ga driver front running light 2g AWD front axles 95-95 t.c. |
Re: FS Tons of mitsu parts
Still interested in 1g stock rims???
|
Re: FS Tons of mitsu parts
Friday morning I can stop by and buy the 1g rims for 30.
|
Re: FS Tons of mitsu parts
Quote:
|
Re: FS Tons of mitsu parts
Quote:
|
Re: FS Tons of mitsu parts
Just got back from picking up some parts, he has a ton of stuff.
Shane/Ecoli needs a 1g radiator if you have one. |
Re: FS Tons of mitsu parts
All i have is a 2g radiator. The 1g one I had was really ugly so it went to the dump!
|
All times are GMT -5. The time now is 11:12 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.