MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Turbo / Engine / Drivetrain (http://www.mitsustyle.com/forums/forumdisplay.php?f=91)
-   -   Ported 1G or 2G? (http://www.mitsustyle.com/forums/showthread.php?t=20624)

GsXtUrBo98 09-07-2008 11:55 AM

Ported 1G or 2G?
 
Well I have bad boost creep that I have mentioned before and was thinking about getting a ported O2 housing but which one would be better??

As of now I have a 1G O2 housing.. Dont ask me why because it was on the car when I bought it..

Should I buy a 2G O2 housing and port it or just port the 1G O2 housing. Which is better??

Capinoy123 09-07-2008 12:55 PM

Re: Ported 1G or 2G?
 
if you ask me, im all about the "whatever gets the job done," way and if you don't have to spend any money than don't.. Ur talking about a stock o2 housing so im assume ur using a 14b, 16g or the stock t25??

scheides 09-07-2008 01:39 PM

Re: Ported 1G or 2G?
 
I'd do a ported 2G.

95talonracer 09-07-2008 02:52 PM

Re: Ported 1G or 2G?
 
Quote:

Originally Posted by Capinoy123 (Post 255025)
"whatever gets the job done,"

Well in his case this doesn't work to eliminate boost creep. Port the 02 housing.

GsXtUrBo98 09-07-2008 04:54 PM

Re: Ported 1G or 2G?
 
Quote:

Originally Posted by Capinoy123 (Post 255025)
if you ask me, im all about the "whatever gets the job done," way and if you don't have to spend any money than don't.. Ur talking about a stock o2 housing so im assume ur using a 14b, 16g or the stock t25??


I'm running a evo 3 big 16G..

Kracka 09-07-2008 05:28 PM

Re: Ported 1G or 2G?
 
How about a nice EvoIII o2 housing or a 2.5" tubular stainless steel unit?

If you are just deciding between the 1G or 2G though, the 2G is better (especially when ported).

brando 09-07-2008 06:36 PM

Re: Ported 1G or 2G?
 
lipp thats all i have to say

95talonracer 09-07-2008 06:55 PM

Re: Ported 1G or 2G?
 
Quote:

Originally Posted by brando (Post 255083)
lipp thats all i have to say

I agree. Thats what I am running and I even ported it to work better with my turbo.

GsXtUrBo98 09-07-2008 08:09 PM

Re: Ported 1G or 2G?
 
Quote:

Originally Posted by 95talonracer (Post 255093)
I agree. Thats what I am running and I even ported it to work better with my turbo.

Ya well over 200 dollars is a little steap at the moment...

Kracka 09-07-2008 08:29 PM

Re: Ported 1G or 2G?
 
http://cgi.ebay.com/ebaymotors/DSM-T...spagenameZWDVW

or

http://cgi.ebay.com/ebaymotors/DSM-O...spagenameZWDVW

GsXtUrBo98 09-07-2008 09:11 PM

Re: Ported 1G or 2G?
 
They both look nice and im tempted but if i was going to go with ebay I think I might go with a 02 dump... but I see what your saying.

Kracka 09-07-2008 09:14 PM

Re: Ported 1G or 2G?
 
Do the dump then. I had one once...wouldn't do one again. Cool at first but then they just get annoying.

Kevin 1G Drummer 09-07-2008 10:52 PM

Re: Ported 1G or 2G?
 
I'd never run an external dump. I would get sick of that right away.

GsXtUrBo98 09-07-2008 11:27 PM

Re: Ported 1G or 2G?
 
well kevin and blageo have external dumps and its not too bad but i do see what you mean about it getting old after a while...

95talonracer 09-07-2008 11:29 PM

Re: Ported 1G or 2G?
 
No dont do external dump, it sucks!!

GsXtUrBo98 09-07-2008 11:49 PM

Re: Ported 1G or 2G?
 
Quote:

Originally Posted by 95talonracer (Post 255148)
No dont do external dump, it sucks!!

Ok Ok.. Well I found a ported 2G o2 housing that I'm picking up on tuesday so problem solved!!


All times are GMT -5. The time now is 05:37 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.