2g GST aftermarket ebay downpipe
 

I just recently ordered a ebay downpipe and when I bolt it on to see if it would bolt up to my o2 housing, it did, but doesn't match up perfectly. Just thought I post it up and see if you guys think it would cause any problems.
This is for a 2g gst, 2.5 from o2 to 3 inch ebay downpipe, it'll be bolted onto the e3 16g as seen in the pictures.

http://s101.photobucket.com/albums/m...h_IMG_0243.jpghttp://s101.photobucket.com/albums/m...h_IMG_0241.jpg



http://s101.photobucket.com/albums/m...h_IMG_0246.jpghttp://s101.photobucket.com/albums/m...h_IMG_0245.jpghttp://s101.photobucket.com/albums/m...h_IMG_0244.jpg

Re: 2g GST aftermarket ebay downpipe
 

Whats the problem? It seems to bolt up.

Is that downpipe really 3"? There usually isn't any room at all between the pipe and the nuts with a 3" pipe.

Re: 2g GST aftermarket ebay downpipe
 

It's a cat. elim. downpipe. It's 2 1/2 at the front where it's bolting up to the o2 housing and it goes down to a 3 inch to my buschurracing catback which is 3 inch also. It does bolt up but the size of the flange don't match up pefectly. I'm just curious as to if this will be causing any problem, that's all.

Re: 2g GST aftermarket ebay downpipe
 

My thoughts exactly. I looked at all the pics, thinking I missed something. As long as it sits flush, you should be just fine.