Some BS suspension bolts
 

Long story short, I left my car at my uncles and he wanted to go ahead and do things his way to pull the axles out and he chiseled some nuts off.

The first one that must have been chiseled off has a "crown" on it or a "lip", I can't think of the fucking word, I'm pissed. They're all fine thread I'm sure and I cannot get them anywhere around this town so I was wondering if anyone knows the part number?

Kind of like this.

l | l
----

The 2nd one seems to have a nylon sleeve in it. I believe it's a 17mm but could be as little as 14mm. They're in my pocket but I forgot my pocket tools at home.

l | l

Yeah, I'll try to get pics. I can cell phone pic it if anyone wants to give me their number. I'll be out at my buddys workin on shit tonight so if anyone can just help me out, text my cell. 320 three zero five 0668.



I'm sorry to waste your guys' time with no pics but I cannot find a diagram of pics/part numbers and I don't even positivley know where the shit came from. I think on the control arm that holds the strut to the lower.
And yes i VFAQ'd it with no success.

Thanks guys,

-SA

Re: Some BS suspension bolts
 

Post the naughty pics of the ex.

Oh, and go to the hardware store with the nut and match them up.

Re: Some BS suspension bolts
 

Not sure if this will help but...
http://www.machv.com/frsustandsp.html

http://www.machv.com/steeringgear.html

The "Castle" nut is most likely for the tie rod ends and the one with the insert is probably the upper ball joint, not too sure.

Re: Some BS suspension bolts
 

You are correct! Thanks to Kracka too.

thanks guys

Re: Some BS suspension bolts
 

Well the two that I need, one has some "nylon(?)" insert, and the other has a washer attached to it and they both spin freely of eachother but are attached.

Anyone know the name?

I've went to every hardware store within 12 miles and couldn't find anything close. I had a hell of a time just finding bolts to put the fucking engine on the stand. The 4 that I did find were the onlly ones they had and were $3 a piece.

Re: Some BS suspension bolts
 

the best place i've found for auto bolts has been the napa in my town... yes some of them are that red tinted but they are the only ones that thread in without purchasing oem bolts. another thing to remember is that the pitch is a 1.25 (or 1.5) for alot of stuff so its kind of a fucked up size... or at least thats what my bolts for the engine stand were

Re: Some BS suspension bolts
 

Yeah, I went to napa right away, nothing was the right size. We checked every damn shelf and nothing was the right size.

I'm having a hell of a time getting these and I'm wishing that Mitsu sold a box with every god damn bolt that puts the car together all in the box. lol