FS: Feeler, 97 Talon TSi AWD Road Race Ready!!!
Well, sorta just testing waters here. If I don’t get near this asking price, I will keep the car for a bit and part it out at another time. If I do sell this car i would really love to see this car go to someone in the road-racing scene as I have spent LOTS of money and LOTS and LOTS of time building this car for road-race use.
To start with, this car performs VERY well and nothing has been hacked, every mod and repair has been done with reliability in mind. There is nothing worse than breaking down at the track. The motor is a fresh 6 bolt motor with not even 1000k miles on it. Compression is PERFECT! This motor has not seen a big track day yet. get it while she's fresh!! MODS: Engine:6 bot 4g63 2.0L Motor 1g rods w/2g pistons (OEM Mitsu Rings) ACL Main and Rod Bearings ARP Main and Head Studs Forced Performance BIG T28 Turbo Forced Performance Tubular-Cast Race Manifold Ported 2g O2 Housing 2.5inch Downpipe 3inch Cat-Back Exhaust 1g Throttle Body 2.5inch I/C Pipes (ASM) 1g Crushed BOV FMIC (20x10x2.5) MSD DIS-2 Ignition DSM-Link V2 3-Bar GM Sensor FIC 550cc Injectors Walbro 190LPH Fuel Pump Water/Alky/meth Injection Kit (Currently running 100% meth) Dual M7 Nozzles mounted on TB Elbow. Drivetrain: Stock Transmission (Shifts like butter!!!) RRE Light Flywheel ACT 2600 Clutch (street Disc) Under-Hood Shift Kit (skateboard bearings) Suspension & Brakes: Koni Sport Shocks GC sleeves, perches, & coaxial hats RRE pillowballs HyperCoil Springs (650lb Front / 425lb Rear) RM-DSM Front and Rear Sway Bars Redrilled front upper A-arms (2.5 degrees camber) ES lower front bushings Flipped driver's compression arm (4.5 degrees caster) Rear Camber Kit (Shims) TCE Wilwood Brake Kit (front): -13in X 1.25in Rotor, Aluminum Hats -Wilwood FSL 4-plot Calipers -SS Brake Lines -PolyMatrix B pads for track, "D" pads for street ATE Super Blue DOT4 Brake Fluid 17x8 +40mm ASA IS6s with 245/40/17 Kumho SPTs Interior/Gauges: Harness Bar Corbeau Forza Seats Momo Race Steering Wheel Sparco 5-point Harness Boost and EGT Gauges on A-Piller Weight Reduction: Full A/C removal Battery Relocation to Rear Full Radio and Speakers all Removed Rear Seats deleted Bumper Supports Total Car Weight without Driver = 2900lbs Car is an estimated 300whp (Dyno'd at 265whp prior to the Meth Injection and at 17psi) Car is currently tuned at 19psi with the meth injection. My Price is $10,000. If you may be interested in the car but don’t want to spend that much, I do have some of the stock parts such as the brakes setup that I would be willing to work with you, however, the this car is setup perfect just the way it sits, I encourage anyone to come take a ride, you'll love how this thing handles, brakes and accelerates!!! Any Questions, please email me at andy@northsidecomputers.net http://www.dsmsupport.com/images/asm/dizmmv2/ra1.JPG http://www.dsmsupport.com/images/asm...2/IMG_6394.jpg http://www.dsmsupport.com/images/asm...2/IMG_4143.jpg http://www.dsmsupport.com/images/asm...2/IMG_4148.jpg http://www.dsmsupport.com/images/asm...2/IMG_4011.jpg http://www.dsmsupport.com/images/asm...2/IMG_3974.jpg the 2g rod compared to the 1g rod: http://www.dsmsupport.com/images/asm/dizmmv2/img051.jpg http://www.dsmsupport.com/images/asm...20-08_1414.jpg http://www.dsmsupport.com/images/asm...17-08_1726.jpg http://www.dsmsupport.com/images/asm...2/IMG_6624.jpg http://www.dsmsupport.com/images/asm/cw/1.jpg http://www.dsmsupport.com/images/and...06-08_1944.jpg http://www.dsmsupport.com/images/and...06-08_0108.jpg http://www.dsmsupport.com/images/and...2/IMG_3649.jpg |
All times are GMT -5. The time now is 08:48 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.