New product devolopment
 

We will be posting our new product lines and our ideas here.
We love input so always feel free to comment and post your ideas!

Thanks again,
THE PRIMO STAFF
Jesse Hewitt
Mike Blageo
Matt Carlson
Mike Belair

Special thanks to Jay W. and Mike S. (mike55112) for donating their time and cars to help us develope products. Thanks Guys!!

Re: New product devolopment
 

So... what to do with this?
http://i592.photobucket.com/albums/t...e/DSC00720.jpg

http://i592.photobucket.com/albums/t...e/DSC00721.jpg

Current Plans...
-Exhaust system 3 "
-SS and mild steel for a budget,
-intercooler hardpipe's
SS, Alum, and mild steel,
-FMIC Kit
-Intake
-Factory Look intake
-Regular "cold air" intake
-etc.
-few others but not for sure yet,

Also major props to Jay W. for letting us use his car for prototyping

Re: New product devolopment
 

Awesome! Good luck with it guys! I'll have to swing by and see it sometime. Maybe I could give you guys a few pointers or suggestions.

Re: New product devolopment
 

Sweet :D Take lots of pics!

Re: New product devolopment
 

Now I have to definatley have to drag my ass over to primo...live 10 minutes away..yet have never been..weird...haha.

Re: New product devolopment
 

Hahaha, good idea dudes!

Re: New product devolopment
 

We're almost finished making the CAS Heat Shield for the EVO... We should have a couple of them to give away at the dyno day as well as some license plate brackets.

Anyone have any ideas on colors for them?

We were thinking of doing black, red & polished..

Ideas, Comments, Suggestions are always welcome

-Stephan

Re: New product devolopment
 

Black, polished, and red (to match the valve cover) sound like good ideas to me.

Re: New product devolopment
 

We also maybe were thinking wrinkle black as well. Thats what Im doing for my valve cover and upper intercooler pipe.

Re: New product devolopment
 

Thank you guys VERY much for donating the CAS shields and the battery tray today! They all looked very nice; I happened to win the black CAS shield and already installed it :D

Re: New product devolopment
 

How much for a polished one (CAS shield)? I'd like one please :)

Very nice!

Re: New product devolopment
 

I got the polished one via my cousin today, Early B-day presents rock :)

I like it, it's polished very well, mirror like. I'm hoping to throw it on tomorrow. Thanks for donating!

Re: New product devolopment
 

$25 for the Heatshields
please see this thread...http://www.mitsustyle.com/forums/sho...616#post290616

Re: New product devolopment
 

Here are some better pics of mine.

Re: New product devolopment
 

We got some Radiator brackets cut out today and we will be powder coating and polishing some over the next few days. Here is a sneak peak.
http://i592.photobucket.com/albums/t...cture003-1.jpg

http://i592.photobucket.com/albums/t...Picture002.jpg

We also started some spark plug covers. But these wont be available for a few weeks.

Re: New product devolopment
 

Just a thought: Should there be more rubber on the radiator tabs? The stock ones have a bit more give to them don't they? I just worry about the plastic endtanks and the mounting pins (from the radiator itself) cracking from too much vibration.

Re: New product devolopment
 

Would it be better to cover the front of the CAS as well?

Re: New product devolopment
 

Ya we are trying this out on my car right now, we are getting some rubber inserts that will give a little more.

Re: New product devolopment
 

We are thinking that as well, We are also wondering if the alignment pins in the stock ones will be needed to stop the raitator from shifting. This one was just a prototype to try it out. We will design a different one if these doen work out.

This brings up a good point but they way we look at it is the exhaust manifold is the hottest parts, the radiator hose doesnt get that hot compaired to the exhaust. And closing the CAS in with another side would more then likely trap heat in and around the CAS.

Re: New product devolopment
 

I think utilizing the alignment pins plus a little more rubber would be a good idea. Can't wait to see the final product :D