Competition Clutch DSM Twin Disc Review
 

Hey guys, I want to share my experience with my new clutch setup. I wrote it in Word and exported it as a JPEG so it would be easier to update multiple forums as needed.


http://i269.photobucket.com/albums/j...g/ff769690.jpg

http://i269.photobucket.com/albums/j...g/05f7a302.jpg

http://i269.photobucket.com/albums/j...g/5c5f4997.jpg

http://i269.photobucket.com/albums/j...g/57029a1f.jpg

http://i269.photobucket.com/albums/j...g/b7baa318.jpg

http://i269.photobucket.com/albums/j...g/1738020e.jpg

http://i269.photobucket.com/albums/j...g/98416a43.jpg

Re: Competition Clutch DSM Twin Disc Review
 

Competition Clutch FTW.

Re: Competition Clutch DSM Twin Disc Review
 

Would love one of those in the stealth.

Re: Competition Clutch DSM Twin Disc Review
 

Thank for the write up. I think I'll be getting one of these in the spring, keep us updated!

Re: Competition Clutch DSM Twin Disc Review
 

Very good input! Keep up the good work and let us know of any negative feedback.

Re: Competition Clutch DSM Twin Disc Review
 

Good to hear. i just installed the stage 4 kit from comp after an act failure.
Anyone use the stage 4 kit? i havent got to drive it yet.

http://i473.photobucket.com/albums/r...HPIM0161-1.jpg
http://i473.photobucket.com/albums/r...HPIM0048-1.jpg

Re: Competition Clutch DSM Twin Disc Review
 

Everything I've heard about the comp stage 4 (ON DSM's ONLY) has been great. Brad and Kevin 1g drummer both ran it for quite a while with good results I know.

Re: Competition Clutch DSM Twin Disc Review
 

BOO! I hated that clutch! Material was missing after a few 100 miles. Make sure you use an OEM throw out bearing too. Should of did the ACT 2600/6 puck sprung.

Also this thread is about the twin disc clucth not the stage 4. You should keep this thread clean and not cluttered.

Re: Competition Clutch DSM Twin Disc Review
 

I apologize for getting off topic. If you don't mind me asking, what's wrong with the throwout provided? I used it :/.
I initially wanted the 2600 kit but didn't have the cash.
I was so bummed from my 2100 disk breaking, followed by the pressure plate that messed up my perfect trans, i wanted to try something else.

Re: Competition Clutch DSM Twin Disc Review
 

needtoinsert, don't worry about what Cornfed said. 6 pucks commonly have material break off in certain areas after only a little bit of driving. It's not like they completely fall apart. The clutch I replaced my twin disc with was an ACT2600 with a 6 puck sprung disc. Guess what, material missing after 400ish miles.

Re: Competition Clutch DSM Twin Disc Review
 

I LOVED my CC stage 4 clutch. It was cheap and held almost everything I could throw at it. It held around 500ftlb at db uncorrected after spraying it and then it slipped after going to go do a street pull. That was with a decent amount of miles on it and some runs down a track. If I could go back I'd would have never gotten a twin disc, kept the stage 4, and been happy running high 10s and having a reliable car instead of always going for more