Bradco Torque Converter Dyno Tests
 

I just finished converting my car to an auto. The setup is the same as last year, except the car has an auto transmission with a Bradco converter and a kiggly flex plate. I also did change my twin walbro 255s to Aeromotive 340s. Besides those everything is the same including boost and fuel. Took the car to the dyno to see what kind of power loss I am going to get and was pleased with the results. Special Thanks to Shane for his vodoo tuning skills :)

Manual - 859.8 WHP
Auto - 728 WHP
Loss - 15.33 %

The car has a 2.45 Long rod (Pauter/Ross), Eagle crank, Kelford 276/280, Mangus Cast intake, FIC2150s, Twin Aeromotive 340lph pumps, Dynatec ARC, Garret 4" FMIC, PTE 6266 DBD (T3), Punishment Header and 3.5 downpipe.

The shifting is done with forcedfour.com shiftbox plus.

Here are the dyno sheets:

Manual: http://www.bulfab.com/auto/859-small.jpg
Auto: http://www.bulfab.com/auto/728-small.jpg
Comparison: http://www.bulfab.com/auto/comparison-small.jpg

Video of the Dyno:

http://www.youtube.com/watch?v=RgeAczgJlPs

Re: Bradco Torque Converter Dyno Tests
 

Congrats on getting it done!

I hope you can get to the track asap and run that 8!

Throw this up on the link forums, those guys will have some insight on that bradco for you.

Re: Bradco Torque Converter Dyno Tests
 

It is interesting that the auto spools so much later. What is the stall on the TC? Get some good video when you head to the track!

Re: Bradco Torque Converter Dyno Tests
 

Nice job on the swap. Wanna race a 600rr? Lol. Hopefully now you can run some good times this year

Re: Bradco Torque Converter Dyno Tests
 

The spool is only 300ish rpm later.

Re: Bradco Torque Converter Dyno Tests
 

Nothing a 50-shot won't cure.

Re: Bradco Torque Converter Dyno Tests
 

Track yet?