IC Piping
 

Contact me for any of your IC piping needs. I work mainly in stainless and keep 2.5" and 3" piping in stock. I also try to keep couplers and T-bolts in stock.

Here is a pic of the FMIC piping on a 2g with a GM MAFT in blow through. He wanted the satin finish on the stainless piping to keep the cost down. I can also do full polished.

This setup with a satin UICP and LICP is $525 including couplers and T-bolts. $600 for polished piping. That is for the FMIC being premounted, but I do the rest of the installation.

Re: IC Piping
 

One more of the car done.

Re: IC Piping
 

Here is a 240sx with the SR20DET conversion. I did mild steel piping for him in a special high temp paint that I found. I looks almost like chrome. I also made a polished stainless intake pipe for him, but it doesn't show up well in the pic because of the high polish.

Re: IC Piping
 

So will you sell just bends for us DIYers? Also do you have a tool to bead the ends of the pipes? Thanks!!

Re: IC Piping
 

I can sell bends seperate. I try to keep a good supply of bends and piping in hand. I have about $800 worth right now. I have a batch of silicone couplers being processed. I bead my pipes with weld, it works just fine.

I am also trying to get a quality silicone coupler made from 2.5" to 3.5" for you GM MAFT guys. My supplier right now makes a 2.5" to 3.25", but not to 3.5".

Re: IC Piping
 

How much would it be for a 90 gsx? I have my ETE32 on it and it's a top to bottom front mount. Its' Johns old one. And a Greddy BOV. It doesn't need to be fancy or anything.

Re: IC Piping
 

PM sent.

Re: IC Piping
 

Alright, I just made an order for $450 worth of IC couplers. These are very high quality 4 ply silicone couplers. I tried out several different brands and these were the best. I am dealing directly with the manufacturer. They are a bright blue on the outside. Their transitions are very smooth too, not abrubt like a lot of them and all of their couplers are nice and thick.

I am getting 2.5" 90 degree elbows, 1.75" - 2.5" transitions (14b-16g outlet to 2.5"), 2" - 2.5" (20g/PTE T04E turbo outlet), 2.5" couplers and 3" couplers. I also have $300 worth of 2", 2.5", 3" and 4" T-bolt clamps on the way.

I also talked to the coupler manufacturer and they are going to make me some 2.5" - 3.5" couplers for you MAFT guys! They don't make them now, but they are going to make up tooling for me. They are 2 months out right now.

Re: IC Piping
 

How much for the 2.5 90 deg elbows?
=Jason-

Re: IC Piping
 

http://jetscustoms.com/xcart/home.php?cat=5

Order them from me though, the online ordering isn't done yet.

Re: IC Piping
 

Are there any silicone couplings or reducers that anyone needs? I am making an order on Monday, so I can put it in with that order.

Re: IC Piping
 

i need a 90* coupler that is also a reducer that goes from 2-2.25". i've seen them for sale but lately i've had trouble finding them again with this gay dialup

Re: IC Piping
 

I will check to see if they have them.

Re: IC Piping
 

I just got another $350 worth of silicone couplers and transitions in stock. I now have 2.5-3.25" (3" MAFT), 2.25-2.5" (2g SMIC), 1.75" couplers, 2.25" couplers and I replenished my stock of other normally stocked items.

Re: IC Piping
 

jet, how much does 2 couplers for the 3" gm maf cost? (2.5-3.25)

-A. Swift

Re: IC Piping
 

Transitions are $22 each. They are nice blue silicone ones. I tried 4 different brands before I settled on this company and I deal directly with the manufacturer.

Re: IC Piping
 

how much for just an upper ic pipe for a 2nd gen any finish but for a gm maf set up. i already have the couplers for the gm maf and what not so id only need the one to the tb and ic. thanks

hks bov flange

Re: IC Piping
 

What IC?

Re: IC Piping
 

stock side mount, and i already have lower ic piping

Re: IC Piping
 

The damn HKS BOV flanges are expensive. With the 2 couplers, 8 t-bolts, HKS stainless flange and piping it would be $175. That is 2.5" 100% stainless.