MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Turbo / Engine / Drivetrain (http://www.mitsustyle.com/forums/forumdisplay.php?f=91)
-   -   Compression Test Results 2 (http://www.mitsustyle.com/forums/showthread.php?t=7803)

blageo23 06-08-2005 08:34 AM

Compression Test Results 2
 
I did a compression test on my car yesterday and it came out:
#1-145
#2-147
#3-148
#4-145
I just did a 6Bolt swap with topline rebuild kit,i forget what compression pistons they are.(8:1) Is that a normal results? There is about 200 miles on the rebuild. and the car was warm but maybe not running temp. I know that they are sapose to be what 10% of eachother or something, but I would like to know if this is normal.
Mike

Raptor 06-08-2005 11:17 AM

Re: Compression Test Results 2
 
If the motor was just rebuilt with 8:1 pistons, that is low. Did you do the valves as well?

blageo23 06-08-2005 12:36 PM

Re: Compression Test Results 2
 
I did nothing to the head. when i bought it the guy told me it was rebuilt like 3000 mile before i bought it. I dont know if that is true but it looked clean and good from what i could tell. but im a narnar with that stuff so im not 100% sure.

JET 06-08-2005 02:06 PM

Re: Compression Test Results 2
 
Maybe the rings aren't broken in yet. That is pretty low though.

Kracka 06-08-2005 03:19 PM

Re: Compression Test Results 2
 
Put a few thousand more miles on it and check it again at full operation temp. Make sure to keep using conventional oil during break-in.


All times are GMT -5. The time now is 01:36 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.