MitsuStyle - View Single Post - Thomas Knight Supercharger Kit, Eaton M90, 3000gt

Pushit2.0 · 09-30-2005

I have not tried myself but according to Knight you can not get that pulley off the PS pump with out cutting it apart. But if we are putting on a differnt pulley I guess it would not matter. The belt is not slipping I checked a few times on the dyno and it was just as warm as the AC/ALT belt. I know befor I modified the tensioner it was slipping, But a bolt tension set up similar to a 1g alternator tensioner fixed the problem.

~John

09-30-2005	#18
Pushit2.0 15min late to the world 12 Babes of Christmas Champion! 3D Championship Golf Champion! Drag Race Champion! Drifting Champion! Duck Hunter Champion! Street Racer Champion! Tire Toss Champion! Join Date: Oct 2003 Location: getting a monster Drives: a moon taxi Posts: 3,692	Re: Thomas Knight Supercharger Kit, Eaton M90, 3000gt I have not tried myself but according to Knight you can not get that pulley off the PS pump with out cutting it apart. But if we are putting on a differnt pulley I guess it would not matter. The belt is not slipping I checked a few times on the dyno and it was just as warm as the AC/ALT belt. I know befor I modified the tensioner it was slipping, But a bolt tension set up similar to a 1g alternator tensioner fixed the problem. ~John __________________ Moon taxi: 9.45@156.9 mph 41psi 2011... Letting people down sense 2012.