MitsuStyle - View Single Post

**JET** · 10-24-2005

The problem is that you really don't know if it is knocking or not. The knock sensors are extremely picky on the torque settings. Since you had yours rebuilt, it has been out and probably not torqued back in properly. DSMlink and the AEM allow you to calibrate the knock sensor and make sure it is reading correctly.

You could possibly be running high EGT's if you are running too much timing, but that would be the only negative effect if you truly aren't knocking.

10-24-2005	#6
JET Is funding Exxon. Join Date: Oct 2003 Location: Ham Lake Drives: like a bat outta hell! Posts: 7,983	Re: How much boost? The problem is that you really don't know if it is knocking or not. The knock sensors are extremely picky on the torque settings. Since you had yours rebuilt, it has been out and probably not torqued back in properly. DSMlink and the AEM allow you to calibrate the knock sensor and make sure it is reading correctly. You could possibly be running high EGT's if you are running too much timing, but that would be the only negative effect if you truly aren't knocking. __________________ Is burning corn and stayin' warm! My motorcycle is stock and reliable, my Talon is neither!