MitsuStyle - View Single Post

niterydr · 11-22-2005

DSMDUDE-The factory 4g63 CAST crank can be reground just fine. Re-nitriting is recommended, and the cast should work just fine. I have had personal experience with a few renitrated cranks that have been undercut and they work just fine.
Is a factory crank that isn't undercut nice? Yes, is it required, not always when on a budget.

11-22-2005	#11
niterydr back in the saddle again 24 Hours Rally Champion! 3D Pacman white house edition Champion! 3D Racing - Track 2 Champion! ATV Winter Challenge Champion! Bloody Pingu Champion! WRX Racing 2 Champion! Tournaments Won: 5 Join Date: Oct 2003 Location: Elkhart Texas Drives: 2015 Ram Quad Cab Hemi, 1999 FRC Corvette, 93 Stealth Turbo Posts: 6,411	Re: OEM VS. Aftermarket Bearings DSMDUDE-The factory 4g63 CAST crank can be reground just fine. Re-nitriting is recommended, and the cast should work just fine. I have had personal experience with a few renitrated cranks that have been undercut and they work just fine. Is a factory crank that isn't undercut nice? Yes, is it required, not always when on a budget. __________________ My street car runs low 11's and my race car's personal best is a mid 11....