MitsuStyle - View Single Post

**Shane@DBPerformance** · 01-06-2006

Which F22 is it? I assume it is one of the common US SOHC versions? Is it VTEC or not?

300HP is a lot for one of those motors, they have displacement, but usually don't make good power past 6000RPMs. He would probably have to build the bottom end to push enough boost to get anywhere close to 300hp. The stock pistons are low compression, but they are not designed to handle boost and it is an open deck block.

01-06-2006	#2
Shane@DBPerformance formerly ecoli Join Date: Oct 2003 Location: On the dyno Posts: 4,892	Re: F22 Head rebuild/build Which F22 is it? I assume it is one of the common US SOHC versions? Is it VTEC or not? 300HP is a lot for one of those motors, they have displacement, but usually don't make good power past 6000RPMs. He would probably have to build the bottom end to push enough boost to get anywhere close to 300hp. The stock pistons are low compression, but they are not designed to handle boost and it is an open deck block. __________________ www.dbptuning.com