MitsuStyle - View Single Post

**scheides** · 01-23-2006

Year/Model info? Supply more info before you ask a semi-vague question please. As long as you have a thick blockoff plate, you just bolt that in place of the EGR valve, then rip out the valve, canister, and everything associated with it. If you have a 2g, unless you do a little research, you will throw a CEL. On a 1g, this will cause no problems.

01-23-2006	#3
scheides flips McGee Cribbage Square Champion! Great Mahjong: Classic Champion! Mah Jongg Solitaire Champion! Mahjong Connect Champion! MuMu Champion! Join Date: May 2004 Location: Minneapolis, MN Drives: BeaterX Posts: 12,900	Re: Egr Year/Model info? Supply more info before you ask a semi-vague question please. As long as you have a thick blockoff plate, you just bolt that in place of the EGR valve, then rip out the valve, canister, and everything associated with it. If you have a 2g, unless you do a little research, you will throw a CEL. On a 1g, this will cause no problems. Last edited by scheides; 01-23-2006 at 12:46 PM..