Quote:
|
Originally Posted by JET
If you think about a regrind, it will never get more lift than the original. If they are using stock cams for the blank, they aren't going to work great without a larger ratio on the rocker arm to produce more effective lift.
|
Not sure if that statement is true. Think about why they are called "re-grinds". The reason for the shims is because the base circle of the cam is ground to a smaller diameter, to increase the lift of the cam in relation to the follower. If you make the base circle smaller, it makes the lobe bigger. The shims take up the difference.
__________________
"You don't have a clue. You couldn't get a clue during the clue mating season in a field full of horny clues if you smeared your body with clue musk and did the clue mating dance."
When she get's bitchy, SPANK THAT ASS!
(#Y#)