|
Re: DKS Cams
Quote:
|
Originally Posted by niterydr
That would be a "hardweld" cam.
Therfore you need to shim your lifter, or in our case a HLA so the radio maintains similar to stock.
Case in point, my cams.
Going from .375" to .412" lift. I am being told to use a #10 washer (.030"). I'll be dialing out the factory overlap with aftermarket Cam gears.
|
Are you saying you will be changing your rocker ratio by shimming it?
I think you're actually talking about shimming the HLA because you have a small base circle cam and you want to maintain the stock lifter preload.
__________________
'07 Z06 Black/Black 2LZ
Headers, CAI, Tuning, 160 T-stat & 125hp dry N2O kit.
10.48 @ 136.86 w/1.65 60'
|