[TurboDomestics]

I crashed my old laser, and then bought a talon shell, and swapped everything over.

I crashed the laser about 5-6 months ago, so the motor hasnt ran in awhile. Everything worked beautifully on the laser, so I know that everything I pulled off the laser is good.

Now heres my problem:

-The car will not start, it turns over but it will not start up. I tested my coil pack, and it checked out ok, I have brand new plugs and wires, so it should be getting spark. It gets fuel at pressure at my FPR, but no fuel enters the cylinders. I know my ECU is getting power, (Stock boost gauge goes to 0, and the CEL comes on for 5 secs). And after a visual inspection of the ECU it does not appear that the capacitors have leaked.

I was thinking that it was maybe the CAS, but that worked wonderfully on my laser. So maybe its the Injector resistor box? I dont know. How do I go about testing the resistor box? what do the pros think could be causing my problem?

thank you very much!

-Charlie