MitsuStyle - View Single Post

blageo23 · 05-18-2006

I priced it out when I wanted to do it and its like 10 bucks more to go buy a SS oil return from like SBR for example. When I did my SS oil cooler lines I taped(Electical tape) where I wanted to cut and cut down the center of the tape. Then I took that tape off then got a new piece of tape and put it on the end of the line. That helps when Intalling it into the fitting. Then I put some oil on the fitting(the part that goes into the line) which helped it slide in nicely. I also Used regular wrenches with a rubber glove on it to protect the finish of the fittings. Good luck man.

05-18-2006	#5
blageo23 AWD4G64 Join Date: Jun 2004 Location: Shoreview, MN Posts: 2,286	Re: Thinking of making oil return line I priced it out when I wanted to do it and its like 10 bucks more to go buy a SS oil return from like SBR for example. When I did my SS oil cooler lines I taped(Electical tape) where I wanted to cut and cut down the center of the tape. Then I took that tape off then got a new piece of tape and put it on the end of the line. That helps when Intalling it into the fitting. Then I put some oil on the fitting(the part that goes into the line) which helped it slide in nicely. I also Used regular wrenches with a rubber glove on it to protect the finish of the fittings. Good luck man.