MitsuStyle - View Single Post

tim · 08-15-2006

Drill down the center of the broken stud and use an eazy out. Before you start wrenching on the easy out make sure to heat the head with a torch. Even a MAPP gas torch will do. You should be able to get it out that way. IMO, taking the head off should be the last resort.

08-15-2006	#4
tim .. Join Date: Oct 2005 Location: Mondovi, Wi Posts: 1,326	Re: Exhaust Studs Drill down the center of the broken stud and use an eazy out. Before you start wrenching on the easy out make sure to heat the head with a torch. Even a MAPP gas torch will do. You should be able to get it out that way. IMO, taking the head off should be the last resort.