MitsuStyle - View Single Post

SLOW_V · 10-01-2006

There are not enought clearence to removed the transfer. The oil pan is directly next to it and wedged. It is not supposed to be like that.
I don't want to jack the motor too much and have the transfer and cv shaft still in the tranny. This might messed up the seal or other things. The left cv shaft can't come out until the transfer is removed.

10-01-2006	#3
SLOW_V Join Date: Apr 2006 Location: STP Posts: 206	Re: Tansfer case wedged into oil pan There are not enought clearence to removed the transfer. The oil pan is directly next to it and wedged. It is not supposed to be like that. I don't want to jack the motor too much and have the transfer and cv shaft still in the tranny. This might messed up the seal or other things. The left cv shaft can't come out until the transfer is removed. Last edited by SLOW_V; 10-01-2006 at 10:07 PM..