MitsuStyle - View Single Post

Pushit2.0 · 03-08-2007

I am going to try 1 Tial 38mm with a 1bar spring for pump then add another spring for 1.6bar then a MBC and turn it up untill the head blows off the block, switching fuel at about 35psi. The Tial will be just off the #2 and #3 collector just befor the turbo. If that is not enough then I will add a 2nd waste gate. Right now the manifold is divided with a divided flange and the primary runners are within 1" of equal length.

~John

03-08-2007	#14
Pushit2.0 15min late to the world 12 Babes of Christmas Champion! 3D Championship Golf Champion! Drag Race Champion! Drifting Champion! Duck Hunter Champion! Street Racer Champion! Tire Toss Champion! Join Date: Oct 2003 Location: getting a monster Drives: a moon taxi Posts: 3,692	Re: Finally getting stuff done on our cars I am going to try 1 Tial 38mm with a 1bar spring for pump then add another spring for 1.6bar then a MBC and turn it up untill the head blows off the block, switching fuel at about 35psi. The Tial will be just off the #2 and #3 collector just befor the turbo. If that is not enough then I will add a 2nd waste gate. Right now the manifold is divided with a divided flange and the primary runners are within 1" of equal length. ~John __________________ Moon taxi: 9.45@156.9 mph 41psi 2011... Letting people down sense 2012.