MitsuStyle - View Single Post

Pushit2.0 · 03-08-2007

I am going to try 1 Tial 38mm with a 1bar spring for pump then add another spring for 1.6bar then a MBC and turn it up untill the head blows off the block, switching fuel at about 35psi. The Tial will be just off the #2 and #3 collector just befor the turbo. If that is not enough then I will add a 2nd waste gate. Right now the manifold is divided with a divided flange and the primary runners are within 1" of equal length.

~John

03-08-2007	#419
Pushit2.0 15min late to the world 12 Babes of Christmas Champion! 3D Championship Golf Champion! Drag Race Champion! Drifting Champion! Duck Hunter Champion! Street Racer Champion! Tire Toss Champion! Join Date: Oct 2003 Location: getting a monster Drives: a moon taxi Posts: 3,692	Re: Finally getting stuff done on our cars I am going to try 1 Tial 38mm with a 1bar spring for pump then add another spring for 1.6bar then a MBC and turn it up untill the head blows off the block, switching fuel at about 35psi. The Tial will be just off the #2 and #3 collector just befor the turbo. If that is not enough then I will add a 2nd waste gate. Right now the manifold is divided with a divided flange and the primary runners are within 1" of equal length. ~John __________________ Moon taxi: 9.45@156.9 mph 41psi 2011... Letting people down sense 2012.