MitsuStyle - View Single Post

niterydr · 10-19-2007

481awhp, no corrections. First clean pull to redline (9300rpm). I've only attempted 8 pulls on it so far, had to get that afr dialed in. The motor is alot tighter for fuel consumption compared to my original estimate.
Those 1600's with that A1000 pump is massive.

We will see what I can get out of it this afternoon, get those AFR's in check, maybe toss some timing at it, bump the boost a bit if we feel like it.
No point in pushing it as the car will be sub 2900lbs w/driver.

10-19-2007	#623
niterydr back in the saddle again 24 Hours Rally Champion! 3D Pacman white house edition Champion! 3D Racing - Track 2 Champion! ATV Winter Challenge Champion! Bloody Pingu Champion! WRX Racing 2 Champion! Tournaments Won: 5 Join Date: Oct 2003 Location: Elkhart Texas Drives: 2015 Ram Quad Cab Hemi, 1999 FRC Corvette, 93 Stealth Turbo Posts: 6,411	Re: Finally getting stuff done on our cars 481awhp, no corrections. First clean pull to redline (9300rpm). I've only attempted 8 pulls on it so far, had to get that afr dialed in. The motor is alot tighter for fuel consumption compared to my original estimate. Those 1600's with that A1000 pump is massive. We will see what I can get out of it this afternoon, get those AFR's in check, maybe toss some timing at it, bump the boost a bit if we feel like it. No point in pushing it as the car will be sub 2900lbs w/driver. __________________ My street car runs low 11's and my race car's personal best is a mid 11....