MitsuStyle - View Single Post

**asshanson** · 12-11-2007

I need these as soon as possible, so I can get my car running and back up to the twin cities.

1. Harness/wires for a 1g Cam Angle Sensor, it's rectangular and has four prongs I believe, it's the black one (hall effect) if that matters. I have the CAS itself, but nothing to plug it into on my 2g.

2. Banjo bolt and fitting to connect the turbo oil feed line on the head to my stainless line with (-4?) AN fitting (the $20 line from SBR). I originally bought the line to go to the filter housing, and it came with a banjo bolt that is a couple millimeters too wide to fit into the head.

12-11-2007	#1
asshanson immune from paybans Join Date: Oct 2005 Location: West Des Moines Drives: poorly Posts: 4,358	Parts needed ASAP I need these as soon as possible, so I can get my car running and back up to the twin cities. 1. Harness/wires for a 1g Cam Angle Sensor, it's rectangular and has four prongs I believe, it's the black one (hall effect) if that matters. I have the CAS itself, but nothing to plug it into on my 2g. 2. Banjo bolt and fitting to connect the turbo oil feed line on the head to my stainless line with (-4?) AN fitting (the $20 line from SBR). I originally bought the line to go to the filter housing, and it came with a banjo bolt that is a couple millimeters too wide to fit into the head.