MitsuStyle - View Single Post

vassil · 02-23-2008

Yeah,

I bitched Jake out because of his irresistable desire to be in other people's business. Both Tim and I messed up the upper strut mounts in our tube chassis. We are guessing it was because of the fact the the floor is not leveled and because of heating it too much while welding. Either way, I cut my whole front out and fixed it and Matt (the dude that bought Tim's & Trina's EVO) also cut his out. The little bitch could not resist to post on the forums just to make sure he takes a shit on an already complete sale. It was a failure on his part and it pissed me off. Way back in the day when we were still on good terms I told him to stay out of Tim's and my shit, just like we stay out of his.

Anyways ... I was snooping around and looking for activity from Jake and Vogelperformance.com and found a couple pieces of information.

1. Jake has been really active on some ricer board called Autotechniques. He is the Minnesota VP. If you wanna see his posts here is a direct link that will display all of his activity on that forum:

http://www.autotechniques.org/forums...ch_author=Jake

2. I looked around his website and found some images of the new shop and good old Jake. Here they are:

02-23-2008	#227
vassil Been there, done that. Join Date: Oct 2003 Location: Winona, MN Posts: 130	Re: Where's Jake? Yeah, I bitched Jake out because of his irresistable desire to be in other people's business. Both Tim and I messed up the upper strut mounts in our tube chassis. We are guessing it was because of the fact the the floor is not leveled and because of heating it too much while welding. Either way, I cut my whole front out and fixed it and Matt (the dude that bought Tim's & Trina's EVO) also cut his out. The little bitch could not resist to post on the forums just to make sure he takes a shit on an already complete sale. It was a failure on his part and it pissed me off. Way back in the day when we were still on good terms I told him to stay out of Tim's and my shit, just like we stay out of his. Anyways ... I was snooping around and looking for activity from Jake and Vogelperformance.com and found a couple pieces of information. 1. Jake has been really active on some ricer board called Autotechniques. He is the Minnesota VP. If you wanna see his posts here is a direct link that will display all of his activity on that forum: http://www.autotechniques.org/forums...ch_author=Jake 2. I looked around his website and found some images of the new shop and good old Jake. Here they are: Attached Thumbnails __________________ Manual 859.8WHP / 642 ft/lbs 10.23@152 Automatic 728WHP / 517 ft/lb 9.85@143 1G DSM Crossmembers BulFab Last edited by vassil; 02-23-2008 at 11:41 PM..